Due to essential maintenance our website will be unavailable from 22:00GMT on Tuesday 2nd May until 06:00 GMT Wednesday 3rd May.

Armeg Stubby Wood Beaver Set 3Pcs

Product Code: 33325
Armeg Stubby Wood Beaver Set 3Pcs
Product Code: 33325
Unique 'Stubby' Armeg Wood Beaver drilling set. Perfect length for in-between joist drilling and awkward, confined spaces. Contains 16, 20 and 25mm dia with 4 flute design for drilling comfort. 4-cutter head design and 4 deep auger style flutes. Short, lightweight body for maximum holes per charge.


  • ¼" Hex Shank


L x W: 120 x .
€32.95 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Armeg
  • Product Length : 120 mm
  • Product Type : Stubby Wood Beaver Set
  • Model Name : Wood Beaver
  • Total Product Weight : 0.178 kg
  • Model No : WWB3PCSET120S
  • Colour : Red Flute Finish
  • Pack Size : 1
  • Shank Size : ¼ "
  • Shank Type : Hex
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 3
Product Contents
Stubby length: 16, 20 and 25mm x 120mm drill bits.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

More Items to Consider

More Items to Consider

Loading... Loading...
Armeg Stubby Wood Beaver Set 3Pcs is rated 4.9 out of 5 by 20.
Rated 5 out of 5 by from NOGGIN DRILLING FOR CABLES I bought these for drilling from above through noggins in a stud wall for cable access.The noggins were about 18 inch below the header so I used the stubbys in conjunction with the Ebauer 300mm extension rods. This worked well but you need to take it steadily to avoid misalignment.
Date published: 2017-02-22
Rated 5 out of 5 by from Armeg Wood Beaver Drilling S I Liked this product. It is worth for money. You don't need push the drill juts hold it. Drill bit go on make a hole in the wood, job is done. Excellent product.
Date published: 2017-02-17
Rated 5 out of 5 by from True performer Apart from the price, I would reccomend these to any one who wants to drill floor joists. I recently had to run some cat6 network cable under the floor upstairs. I used the 20mm stubby beaver (to get inbetween the joists) and it chewed through the wood like it was butter. I brought this product having brought the long 12 mm version to a job and liked the performance. I would recommend it's used with a impact driver in stead of drill simply because the impact action of the driver breaks the wood chips up and because the chips are smaller the cutter does not clog up, saving you time not having to pull the cutter out to unclog the hole. It also has the 1/4 drive on the shank so it fits in most impact drivers as well as most keyless chucks on drills drivers etc. I have also used it on plastic facia, because of the sharp tooth design on the outside of the flutes you get a clean cut hole (less deburring required) that you wouldn't get with a hole saw or normal drill.
Date published: 2016-10-01
Rated 5 out of 5 by from Like a knife through butter Can not recommend these drill bits enough for first fixing through joists eats through and saves loads of time
Date published: 2016-05-05
Rated 5 out of 5 by from Ferocious! Expensive, but they are exceptional drills. I needed a short 16mm wood drill to get through joists for cables, and it needed to fit the 10mm chuck of my 14.4v drill and get between the joists. This has a 6mm (I think) standard fitment so it was spot on. It chews up the wood especially at slow speed, for some reason the last bit to bust through takes a push. Brilliant drill bit, but should be for the money!
Date published: 2016-04-16
Rated 5 out of 5 by from Decent wood bit Used these bits for many years for drilling through floor joists with no problems I use a 18v impact driver which will drive the 25mm bit through easily .I always use an impact drill with any wood bit, because of the way the impact driver works they can be used one handed - I never use an ordinary drill I have too many twisting on me even with the clutch - a plumber I know broke his wrist drilling a floorboard so be warned.
Date published: 2015-11-05
Rated 5 out of 5 by from Great but . . . Great kit as they've all said, and cuts a tidy hole relatively easy through joists. The lead-screw end pulls it through. However the last few millimeters need a bit more force which causes a rough exit. This is because the screw is no longer pulling it through, and theres a large area of cutting edge. No problem unless you're really short of space to push it through. The main issue to watch is that the 25mm bit needs about 25Nm torque. My Ryobi which is purpose made for the tight spaces cannot acheive enough torque for this bit, even though it easily drives a normal 25mm lead-screw bit through.
Date published: 2015-07-02
Rated 5 out of 5 by from Awesome Did quite a bit of research first before going for this set. Needed to run Hep2O piping for CH in the extension and these made the job real easy. Super sharp and took no effort to go through the joists and with the joists on 400 centres I was able to use my Dewalt drill / driver with these and still have a bot of room to make sure the holes were square / level. A brilliant bit of kit and although I have spade bits would have taken longer and wouldn't have been as neat.
Date published: 2015-02-28
  • y_2017, m_4, d_24, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_GB, sid_33325, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie