Bosch Wood Jigsaw Blades Bayonet T234X Pack of 5 Product Code: 10339

Cuts chipboard, wood core plywood, fibre board, softwood (2-65mm).

Features

  • Bayonet Fitting
  • Fast Cut

Specifications

Bayonet fitting. Model number T234X. For cutting chipboard, wood core plywood, fibre board, softwood (2-65mm).
Additional Information
Technical Specification
  • Brand : Bosch
  • Product Length : 91 mm
  • Product Type : Wood Jigsaw Blades Bayonet
  • Total Product Weight : 45 kg
  • Model No : T234X
  • Blade Fitting Type : Bayonet Fitting
  • Pack Size : 5
  • Type of Cut : Fast Cut
  • Suitable Sawing Material : Wood
  • Cutting Capacity : 2-65 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 5
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€11.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Bosch Wood Jigsaw Blades Bayonet T234X Pack of 5 is rated 4.7 out of 5 by 10.
Rated 5 out of 5 by from Excellent blade I needed to cut some MDF and was going to use the same old blades but saw the review for this and gave them a go. Glad I did so because the chipping was minimal and they made a good clean cut. Like all blades they do wear out but the price is definitely worth it.
Date published: 2017-08-20
Rated 2 out of 5 by from Good & Bad! Felt I needed to give a review on these blades, I bought them after reading the good reviews. Brilliant for a straight cut on a worktop for about the length of a sink cut out. After that you need a new blade. WARNING do not use for worktops. these blades wander like mad. They have no set on the teeth, they lose their edge very quickly. Not for me sorry, wont buy these again, very pricey too. Use at your own risk. You have been warned!
Date published: 2017-08-17
Rated 5 out of 5 by from Good blades Nice blades, clean cut and long lasting. Far better than Makita or dewalt in my opinion.
Date published: 2017-08-04
Rated 5 out of 5 by from solid performer I needed to create an opening through a very solid external hardwood door for a letterbox. Having read other reviews I went for these blades. What I got was much straighter lines than I'm used to having previously used the blades supplied with the jigsaw. This made easy work of the task and the blade is as good as new. My only gripe is it will take me a long time to work through the pack of 5!
Date published: 2017-02-20
Rated 5 out of 5 by from Excellent quality, economical. My band saw broke down, so I needed something quick so that I could fulfil an order but I needed more than 50mm cut. Couldn't ask for more. Just right.
Date published: 2016-10-11
Rated 5 out of 5 by from Fantasitc blade for worktops!! This is an amazing blade for laminate tops and wood. I don't even bother cutting laminate tops from the underside when cutting apertures for sinks and hobs. The blade doesn't drift at all (it doesn't bend and cut 'at an angle' like some thinner ones do) and the top hardly chips at all. It's worth noting you will need a smaller blade to do fiddly corners etc. This blade will cut through a 40mm top AND 15mm mdf kitchen unit at the same time if required (YES, it WILL cut 55mm deep and that was actually using a cheap 550W jigsaw). Will be very easy to use even for a DIYer! Don't skimp on blades, they are worth every penny! If you have to save somewhere, get a cheaper jigsaw and good blades.
Date published: 2016-07-06
Rated 5 out of 5 by from Jigsaw Blades These blades cut though 40mm laminate worktop with ease. And they do not drift, not a bit, not even a tad - which as you know is so important when cutting out sink/hob holes. And, it gets better . . . . laminate cut face up with these blades hardly chips at all, it really is a near perfect cut. As these blades are thicker and more rigid they are not good for tight curves but for straight cuts they are just superb. I will definitely keep buying these blades.
Date published: 2015-08-06
Rated 5 out of 5 by from These T234X blades are superb I recently had a nightmare experience with Bosch blade T101BRF, which very substantially wrecked a cut in 38mm kitchen laminate worktop, due to straying to an unbelievable extent. Turns out that particular blade is under-engineered (the steel is unjustifiably thin). That lesson nearly cost me a £100 replacement worktop, and I will never buy another Bosch T101BRF as long as I live. In hoping to avoid a repeat of that disaster, I sought out an alternative blade type and, in spite of the T234X blades very aggressive appearance, it cuts so cleanly that it flies through 38mm laminate leaving a beautifully smooth edge, and (provided you don't rush the cut) chips barely half a millimetre (at most) from the laminate surface, which is completely safe and negligible, to all intents and purposes, and is an impressive result (NB: I never use pendulum action in laminate boards). Both the T101BRF and the T234X are taper-ground (i.e. they get thinner towards the rear of the blade, than the thicker front cutting edge), but, on average, the T234X looks to be approx 0.3mm thicker than the T101BRF, and approx 2.5mm broader. It will come as no surprise then, if I tell you that the T234X is noticeably more rigid. Neither of these blades have any set on the teeth, so, in spite of the tapered grind, neither are suitable for cutting curves. If you wish to efficiently cut 2 x 4 timber, the T234X does an excellent job, and will actually surprise you with it's speed if you switch on the jigsaws pendulum function. If you're a kitchen fitter and you need a blade that will very efficiently cut point-to-point IN A STRAIGHT LINE (between drill holes, for sink cut-outs, etc.), without damaging the laminate surface (assuming a sensible feed rate), and without straying in thick material, due to blade flex, then please give the T234X a try, as it is really superb - in fact, for straight lines in 38mm-50mm laminate worktops, I can think of no better blade on the market. It's that good. If you let the blade cut at its own pace, it glides through smoothly with almost no effort, and the results will speak for themselves. I'd like to see a bi-metal version, but it seems HCS is currently the only option, regardless of brand. Still, the T234X cuts so efficiently that it doesn't appear to blunt as quickly as other blade types, and represents good value for money. These are half the price of the T101BRF and 10x as good... I've seen similarly-toothed blades from other well known brands but have only tried the Bosch T234X. DeWalt's offering looks to be 100% identical. Makita's is similar. Saxton, Milwaukee & Reisser are other options. In all instances, they are HCS, so I prefer to keep buying Bosch branded T234X, as I know how they perform.
Date published: 2014-10-17
  • y_2017, m_9, d_26, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_10339, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie