Bristan Bar Valve Wall Mount 11 Fixing Kit Chrome-Plated

Product Code: 58495
Bristan Bar Valve Wall Mount 11 Fixing Kit Chrome-Plated
Product Code: 58495
€33.95
Plastic construction with brass connectors and chrome-plated shrouds. Enables rigid fixing of any exposed bar valves with 150mm centres to 15mm pipework protruding through the cavity wall surface. Suitable for all plumbing systems.

Features

  • Chrome-Plated
  • 5 Year Manufacturer's Guarantee
  • Guarantees 150mm Centres
  • Adjustable Shrouds Suit 6-15mm Tile Thickness

Specifications

15mm compression inlet connections. G¾" outlet connections. Model: WMNT11 C. EN 248.
€33.95 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Bristan
  • Product Height : 80 mm
  • Product Thickness : 17 mm
  • Product Type : Bar Valve Wall Mount 11 Fixing Kit
  • Finish : Chrome-Plated
  • Total Product Weight : 0.347 kg
  • Model No : WMNT11 C
  • Product Width : 150 mm
  • Colour : Chrome
  • Pack Size : 1
  • Manufacturer Guarantee : 5 Year Manufacturer's Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Adjustable shrouds, wall plate and fixings.
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Bristan Bar Valve Wall Mount 11 Fixing Kit Chrome-Plated is rated 4.4 out of 5 by 29.
Rated 4 out of 5 by from One of the better fittings. Well designed and easy to fit. the only drawback is the need for a large diamond drill to cut the holes in the tiles. Some of the other types of fitting require smaller holes.
Date published: 2016-11-15
Rated 5 out of 5 by from Great product! Easy fit for fitting an exposed shower bar. Studwork needs to be constructed, fit pipework at 180mm centres, level, fit plasterboard and this shower plate. you will need to cut out more of the plasterboard to fit the shower plate. check level again. I always use longer stainless steel screws than the ones supplied, available from Screwfix.
Date published: 2016-06-17
Rated 5 out of 5 by from Brilliant! I have just finished revamping our bathroom, and needed a way of installing a bar valve. Having looked into the best way to do this, I decided on one of these. It was one of the best decisions I made, its brilliantly simple, and gives a solid mount to attach the valve. The only worry I had was trying to cut the tiles around the 45mm diameter raised edge.....although this turned out to be fine with the purchase of a 50mm tile cutter....
Date published: 2016-04-26
Rated 5 out of 5 by from Boss Great product, well designed and easy to install. Good valve compared to other similar products that are more complicated to install.
Date published: 2016-04-23
Rated 4 out of 5 by from Good Bit of Kit Better than most other fixing kits. Good quality brass fittings and well designed nylon bracket too. The bracket is 3mm thick so make allowances when tiling up to it and you will need to cut two 55mm diameter holes for the outlets - I used a 13295 hole cutter which worked a treat. You can buy this kit on eBay for £10.
Date published: 2016-04-09
Rated 2 out of 5 by from 55mm tile drill needed They're fine, do the job and are easy to fit to a stud wall without needing too much extra wood but if you've got porcelain tiles you might have a problem or an expense at least cutting 55mm diameter holes in the tiles. Other fixing kits might be better then - the Bristan 10 kit for example only needs a 15mm hole for each pipe and 5/6mm holes through the tiles for the screws.
Date published: 2016-02-02
Rated 5 out of 5 by from I'm so glad that I bought this As I'm not a professional, I was nervous about tiling around the bath only to later find something wrong when I came to install in the tap. I therefore decided that it was worth buying this wall mount kit to minimise the risk of anything going wrong, and I'm so glad that I did. Whilst this product is not cheap, it is well designed, cleverly clamping onto the plasterboard from the inside as well as screwing in from the outside. It is then easy to tile over, just leaving the two threaded pipe outlets exposed ready for attaching the bar tap. A great product, well recommended.
Date published: 2016-01-02
Rated 4 out of 5 by from Made life easier Only fitted one of these but it's so straight forward, makes tiling easy as its low profile and it just works!
Date published: 2015-12-05
  • y_2016, m_12, d_9, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_en_GB, sid_58495, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie