FloPlast Copper / MDPE Adaptor Kit 22mm x 25mm

Product Code: 25970
FloPlast Copper / MDPE Adaptor Kit 22mm x 25mm
Product Code: 25970
€5.15
Simple and quick to connect, suitable for use below ground on cold water services. Resistant to pull-out. Excellent pressure resistance, tested to 48bar. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme.

Specifications

Connects 22mm copper to 25mm MDPE. BS 6572.
€5.15 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Height : 50 mm
  • Product Type : Copper / MDPE Adaptor Kit
  • Total Product Weight : 0.03 kg
  • Pack Size : 1
  • Product Diameter : 25 mm
  • Manufacturer Guarantee : 1 Year Manufacturer's Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
FloPlast Copper / MDPE Adaptor Kit 22mm x 25mm is rated 4.4 out of 5 by 9.
Rated 5 out of 5 by from Easy to use Very easy to use this product with good instructions
Date published: 2014-12-02
Rated 4 out of 5 by from Very poor instructions This adaptor worked very well once I’d worked out how to put it together. It may be obvious to the trade, but as this is the first time I've used MDPE connectors, it came as a bit of a challenge. The instructions are very poor so, like a previous reviewer, I ended up going to the FloPlast web site to get a clearer look. What also isn’t clear in the product description, is that these are supposed to replace the internal fittings at one end of a FloPlast connector. You need to take one end of the connector to pieces, and replace all the lugs and washers with parts in this kit. If your using this underground then this is probably the best product for the job. However, if your use is above ground, then you’ll be better to go for the JG Speedfit version which is a lot simpler; and once you’ve compared the cost of the FloPlast connector + adapter, against the Speedfit version, then there’s not a lot in it - I used both on this installation.
Date published: 2012-09-06
Rated 4 out of 5 by from Very poor instructions This adaptor worked very well once I’d worked out how to put it together. It may be obvious to the trade, but as this is the first time I've used MDPE connectors, it came as a bit of a challenge. The instructions are very poor so, like a previous reviewer, I ended up going to the FloPlast web site to get a clearer look. What also isn’t clear in the product description, is that these are supposed to replace the internal fittings at one end of a FloPlast connector. You need to take one end of the connector to pieces, and replace all the lugs and washers with parts in this kit. If your using this underground then this is probably the best product for the job. However, if your use is above ground, then you’ll be better to go for the JG Speedfit version which is a lot simpler; and once you’ve compared the cost of the FloPlast connector + adapter, against the Speedfit version, then there’s not a lot in it - I used both on this installation.
Date published: 2012-09-06
Rated 4 out of 5 by from MDPE/Copper adaptor This is what you need to connect 22mm copper to 25mm MDPE. Does what it says
Date published: 2012-07-07
Rated 4 out of 5 by from MDPE/Copper adaptor This is what you need to connect 22mm copper to 25mm MDPE. Does what it says
Date published: 2012-07-07
Rated 4 out of 5 by from May be obvious... I bought this kit to reduce a new 25mm incoming pipe to 22mm copper inside the house. What disappointed me was that the instructions inside the packet only showed the insertion of a stainless steel ring to grip the copper pipe with no reference to the rest of the parts. It didn't take long to figure out where everything went, but as I had never used this kit before I wanted to make certain I was doing it correctly.. After trawling the internet I finally found an online technical handbook on the GF website which showed an exploded component view of all the parts in the kit. Why wasn't this included in the packet with all the parts? Not screwfix's fault, but really poor on the part of GF. Anyway, to anyone who has bought this kit...yes, all parts are used and 3 original parts are discarded.
Date published: 2011-12-15
Rated 4 out of 5 by from May be obvious... I bought this kit to reduce a new 25mm incoming pipe to 22mm copper inside the house. What disappointed me was that the instructions inside the packet only showed the insertion of a stainless steel ring to grip the copper pipe with no reference to the rest of the parts. It didn't take long to figure out where everything went, but as I had never used this kit before I wanted to make certain I was doing it correctly.. After trawling the internet I finally found an online technical handbook on the GF website which showed an exploded component view of all the parts in the kit. Why wasn't this included in the packet with all the parts? Not screwfix's fault, but really poor on the part of GF. Anyway, to anyone who has bought this kit...yes, all parts are used and 3 original parts are discarded.
Date published: 2011-12-15
Rated 5 out of 5 by from Good product as per 15/22mm As the other adapter sold on here, does the job fine. Only thing to bare in mind is if you intend to use 25mm MDPE the you will have to get a 25mm to 22mm reducer. Some poeple can't seem to understand this and under rate the product.
Date published: 2009-02-15
  • y_2016, m_12, d_2, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_25970, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie