Diamond Core SDS Plus Arbor

Product Code: 27287
Diamond Core SDS Plus Arbor
Product Code: 27287
Through-hardened for constant strength. Tough construction to withstand high torques. Should only be used with machines fitted with a clutch.


  • Tapered TCT Guide Drill
  • No Pre-Drilling Necessary
€9.75 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 50 mm
  • Product Length : 150 mm
  • Product Type : Diamond Core SDS Plus Arbor
  • Total Product Weight : 0.15 kg
  • Product Width : 50 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

More Items to Consider

More Items to Consider

Loading... Loading...
Diamond Core SDS Plus Arbor is rated 2.3 out of 5 by 9.
Rated 1 out of 5 by from Use once only! Agree with most of the less than pleased reviews on the item. 4 inch core drill through brick, use once and discard as flutes twist and can prove difficult to remove from drill. (New Titan drill, accessories new, no excuses for it) Sadly, haven't found alternative item to buy from anywhere else, so keep having to use a new one each time! Adds to the cost of the job.
Date published: 2016-08-02
Rated 1 out of 5 by from Poor quality Did not last one morning of moderate use. Very soft steel used. SDS fitting jammed in the drill chuck and had to replace drill. Arbor bent quite easily becoming useless.
Date published: 2016-02-25
Rated 1 out of 5 by from Totally useless Bought this for use with my Titan SDS drill. After drilling one 50mm hole with my core drill I noticed that the shaft of the Arbor had twisted and the SDS flukes on the Arbor shaft were bent out of shape. This made it very difficult to remove the Arbor from my drill, which could have proved costly because the drill would have to have been written off too. Why don't the company who manufacture this Arbor use the same hard steel that they use to manufacture the drill bits. Buy with caution.
Date published: 2016-02-21
Rated 2 out of 5 by from Beware - choose carefully the SDS fitting is quite soft metal. I used as recommended with a core drill having a clutch, and was drilling 152mm dia for a fan through brick / block wall. It snatched and twisted the SDS grouve into a spiral, I had to use a vice and hammer to remove. Screwfix replaced, Even without incident , the replacement is showing marks in the metal from the drill chuck. Summary - may be OK for smaller cores, avoid if using larger diammeter, or tough material which may produce high torque.
Date published: 2016-01-10
Rated 1 out of 5 by from sds arbor bought this arbor along with core drill ,drill guide and ejector drift , managed to drill through soft block ok but half inch into brick, arbor sheared . i then spent 3 hours trying to remove piece that was left in drill chuck.so not pleased.
Date published: 2016-01-01
Rated 4 out of 5 by from Great value I purchased this along with an Erbauer Diamond Core Drill Bit to cut a hole through a 9inch solid brick wall. No problems at all. Appeared well built and fit for purpose...
Date published: 2015-10-21
Rated 1 out of 5 by from SDS shank is too soft. I drilled one 100mm hole with this shank fitted into a SDS drill with a clutch. The core drill never jammed or was pushed with any force. When I looked at the shank after use it was twisted and distorted.
Date published: 2015-05-19
Rated 5 out of 5 by from Arbor I have used it just once so far and it did an excellent job so I'm extremely satisfied.
Date published: 2012-08-15
  • y_2017, m_3, d_20, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_27287, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie