Easydrive Concrete Screws Trade Pack 300 Pcs Product Code: 1533H

T30. High strength tensile steel. Zinc and yellow-passivated. Ideal for fixing of window and door frames, timber beams, battens, wooden lathes, facades, metal profiles, and panels. Suitable for concrete, bricks, hollow blocks and natural stone.


  • Flat Countersunk Head with 5 x Locking Ribs
  • Deep High / Low Thread for High Pull-Out Resistance
  • Self-Drilling Hardened Thread
  • Suitable for Both Domestic & Trade Use
  • Heat-Treated


Fully threaded.
Additional Information
Technical Specification
  • Brand : Easydrive
  • Screwdriver Type : Torx
  • Product Length : Mixed Pack mm
  • Product Type : Concrete Screws Trade Pack
  • Thread Length : Fully threaded
  • Screw Diameter (mm) : 7.5 mm
  • Head Type : Countersunk
  • Pack Size : 1
  • Product Diameter : 7.5 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 300
Product Contents
7.5 x 80 (100), 7.5 x 100 (100), 7.5 x 120 (100), T30 driver bit and SDS plus drill bit.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€39.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Easydrive Concrete Screws Trade Pack 300 Pcs is rated 4.7 out of 5 by 14.
Rated 4 out of 5 by from NOT self drilling These screws are in fact, self-tapping. It would be nice if they could drill the hole as well, but then the hole would be too big.
Date published: 2017-08-27
Rated 5 out of 5 by from Handy & value but see my tips I got these after I saw my builder using these and thought WHAT?!? never knew you could self tap into masonry. Nice! This 'trade' pack of 80, 100 and 120mm screws came with the correct size 6mm SDS drill bit, and each box of screws comes with a T30 bit. This worked out way cheaper than buying individual boxes and drill bit, so I got the lot. These were a great help fitting the hanger rail for my Ikea kitchen wall cabinets, and have since used them to fit gate posts and a catio to the outside of the house. But I still have 100s left over! Use: drill 8mm holes through thing to be fitted, then position on wall and use masonry drill to drill through the hole and into wall. **Ensure as much dust / spoil is removed before inserting screw.** Screw in with a power driver (mine was not an impact driver - **be careful not to overtighten** it's good to 'feel' the wall resistance.) As other reviewers have said, the supplied bit is too short to use this method for 120mm screws and 50mm battens - you would need to mark through the batten and drill the full depth without it there, Note: Some of my screws failed in the wall - actually the wall failed - so since these are quick and easy to use, I would use lots of em. You can carefully unscrew and retighten, but I would avoid that if possible. Great even for temporary fixing - the screws themselves can be re-used even if the holes can't. All in all a good pack of kit - maybe too many for a DIYer.
Date published: 2017-04-19
Rated 4 out of 5 by from Just don't go too far... Solid, fast. Used them on all sorts of brick, block. Have used loads and can send them in OK on low speed with hammer on a 18V combi, but can get tight ( - make sure hole is well cleared before fixing as any dust/debris can jam thread...) and I've had a few heads shear when I've overdone it...i.e. don't get your corded hammer on them...
Date published: 2017-02-23
Rated 5 out of 5 by from Fantastic product Can't praise these enough...awesome product, don't know how l managed all these years without, a must for a keen DIY'er.
Date published: 2017-01-16
Rated 5 out of 5 by from great product Very strong and very secure. Due to the length and nature of these screws my normal drill/driver was not able to secure them, I needed to get an impact driver to finish them.
Date published: 2016-10-18
Rated 5 out of 5 by from Concrete screws Having used these screws for a few years thought I'd buy set complete with drill. The drill supplied is 160mm, unfortunately that is the total length of the drill bit not it's drilling depthmaking it nessecary to buy another longer drill bit. Otherwise good kit.
Date published: 2016-08-17
Rated 5 out of 5 by from The nuts! Goodbye rawl plugs Thanks for the reviews on this product. I have to concur that these screws are the nuts. Used to batten a false ceiling and, particularly as I work alone, these screws made it a doddle. The supplied bit ensured no slips so I have perfectly plumb battens. Also never been a fan of torx (I don't have range of bits) but with the bit supplied they gave a nice tight finish using cordless and quick hand tighten. The screws are coach bolt thickness too so heavy duty and grip seems solid. Time is money so these are an absolute bargain and make a sometimes time-consuming job easy. Looking for other things that need screwing to wall this weekend just to use them again.
Date published: 2016-08-06
Rated 5 out of 5 by from Sweet Using these for securing down pipes 6mm drill and drive screws. Simple.
Date published: 2016-07-23
  • y_2017, m_11, d_3, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_13
  • loc_en_GB, sid_1533H, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie