Eclipse Concealed Door Closer Chrome-Plated

Product Code: 55034
Eclipse Concealed Door Closer Chrome-Plated
Product Code: 55034
€4.45
Adjustable Door Closer. 60 minutes fire tested to EN 1634. Screws included. Requires 22mm hole to fit.

Features

  • Maximum Door Weight 50kg
  • Adjustable
  • Radius Plate Option

Specifications

Fixings supplied. EN 1634.
€4.45 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Eclipse Concealed Door Closer
  • Max Door Weight : 50 kg
  • Fixings Supplied : Fixings supplied
  • Model No : 17977
  • Colour : Chrome-Plated
  • Pack Size : 1
  • Pieces in Pack/Case : 1
  • Adjustable : Adjustable
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Eclipse Concealed Door Closer Chrome-Plated is rated 3.7 out of 5 by 13.
Rated 5 out of 5 by from Easy to fit Great value BUTthe instructions wrongly said make the door hole 26mm - actually 22mm is the barrel diameter. Make sure your hole for the barrel is not too tight. On one install I loosened the frame plate too much and the chain became unscrewed. I needed to remove the whole barrel from door to rectify.
Date published: 2016-11-18
Rated 4 out of 5 by from Guidance on Fitting The instructions give no real guidance on how to fit and many suggestions have an element of risk or may damage the door. The technique I developed is fairly safe. You use a piece of wood something like 36x89x200mm. It is not that critical. Drill a 22mm hole at one end and fit the door closer into the hole. Screw with 4 suitable size screws. Slacken off the tension leaving about three threads. Clamp the timber to a work bench. You can then safely use a claw hammer to withdraw the chain about 35 to 40mm and then fit the clip. Re-tension the door closer to show about the same amount of thread as it was when shipped. You can then easily fit the door closer to the door
Date published: 2016-10-15
Rated 3 out of 5 by from Drill size issue Bought as thought it needed 22mm hole but is 26mm dia and my door is a narrow one. Not good!
Date published: 2016-10-10
Rated 5 out of 5 by from Watch your fingers Best tip read the reviews of others who tell you how to fit these , once you get the hang of it you can rattle them in quick style. Buy a extension for your speed bit rather than an a longer 26mm bit as you can then use it with all your bits Loosen the spring on the closer before you start without winding the threaded rod completely out of the retaining clip at the back . Drill out the door to the required depth and make your recess . Slide the closer in and temporarily screw through both plates gently close the door this gives you an exact mark to place the fixing plate on the frame with no play.
Date published: 2015-12-01
Rated 4 out of 5 by from Don't use the screws provided The heads of the screws provided round off with the least provacation, use your own screws. Apart from that, the actual door closer works fine.
Date published: 2015-10-22
Rated 4 out of 5 by from good value Compared to the branded product this is a lot cheaper and does the same thing. Fixing screws are poor quality so use you own and make sure your drill bit is long enough but all said would always buy again.
Date published: 2015-05-30
Rated 5 out of 5 by from Eclipse Concealed Door Closer Easily fitted with plenty of adjustment, used them on old timber panelled doors, which had been faced with hardboard. No problems at all Excellent product,
Date published: 2015-02-16
Rated 2 out of 5 by from Ok for the money Fitted it but the screws that come with the item are very poor quality. The top of the screw rounded off where the driver goes in and won't come out now. Best to use your own better quality screws if you over want to take it out again and you probably will as it will only last a few years.
Date published: 2013-08-06
  • y_2016, m_12, d_10, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_GB, sid_55034, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie