Energer ENB468ROU 1200W Router 230-240V

Product Code: 31457
Energer ENB468ROU 1200W Router 230-240V
Product Code: 31457
High-powered router with variable speed and spindle lock for easy and controlled cutting. Supplied with 2 guides and depth gauge.


  • ¼" Collet
  • Variable Speed
  • Parallel Fence
  • Dust Extraction Facility
  • Spindle Lock
  • Speed Control Dial
  • Soft-Grip Handle
  • Plunge Depth 50mm
  • Max. Cutter Dia. 32mm
  • Speed Control Dial


Max. plunge stroke 50mm. No load speed 9000-30,000rpm. Weight 3.7kg
€45.95 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Energer
  • Product Type : Router
  • Power Output (Watts/Kw) : 1200 W
  • Corded or Cordless : Corded
  • Total Product Weight : 3.72 kg
  • Model No : ENB468ROU
  • Pack Size : 1
  • Shank Size : ¼ "
  • No Load Speed : 9000-30000 rpm
  • Power Voltage Supply : 230-240 V
  • Carry Case/Bag Included : No
  • Manufacturer Guarantee : 1 Year Manufacturer's Guarantee
  • Pieces in Pack/Case : 1
Product Contents
ENB468ROU, centre pin, parallel guide, template guide, ¼" collet, depth gauge, vacuum adaptor and spanner.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

More Items to Consider

More Items to Consider

Loading... Loading...
Energer ENB468ROU 1200W Router 230-240V is rated 3.9 out of 5 by 60.
Rated 3 out of 5 by from cheap I guess you get what you pay for and this little router is very cheap. That said Its light easy to use and works well, the locking mechanism is very poor and I managed to break it almost first time I used it, and was planning to return it and pay extra for a better one, but instead took it off and use two spanners instead, and I have to say this is a much better way of changing the bit than any locking mechanism. All power tools are dangerous and need to be use with care, but this one could see you taking a trip to A&E if not used with extreme care. The big problem is the start button, is located on the handle and has no form of safety lock. Making it far to easy to start accidentally when picking up the router or when setting up to make a cut. so you have to take care and only plug it in when you are ready to make a cut, but its still a good little cheap DIY tool and works well.
Date published: 2016-11-15
Rated 4 out of 5 by from Routed Out Lovvely bit of kit for the money. Rumour (Google) said I'd need a 1/2" router to avoid vibration but cutting into pine I had no problems at all, helped make a scary job DIY possible :)
Date published: 2016-08-11
Rated 4 out of 5 by from Energer Router Although I am still getting use to using the router, I find it easy to use. It looks well made and robust and a fraction of the cost of some of the top of the range routers. It does what it says on the tin for an amateur DIY man
Date published: 2016-07-27
Rated 1 out of 5 by from Buy cheap, buy twice. Worked well for twelve inches before casting holding the shaft lock fractured. Returned for a replacement, second one didn't even get passed the tightening stage before the same happened again. Upgraded to a more expensive model.
Date published: 2016-06-18
Rated 1 out of 5 by from A bit breaks off with each use Bought this in February for a Welsh Dresser project and it coped okay with the grooves needed for the door panels, although the plunge lock lost its screw and coil. I'm now on the shelf part of the same project and need a new router. First the spindle lock broke right off, leaving a hole in the metal casing, so I had to start changing bits using two spanners. Then the plunge lock started slipping instead of tightening, Evenually the plunge lock broke right off, leaving another gaping hole in the cast metal casing. It's as though every time I used it another piece broke off.
Date published: 2016-05-31
Rated 5 out of 5 by from Great for DIY'er Only had a couple of days so hard to tell reliability but if the same as other Energer products it will last, I have used it and it does a great job, highly recommended.
Date published: 2016-05-11
Rated 3 out of 5 by from Cheap and cheerful router The screw holding the spindle lock broke 1st time I used it, poor quality casting I suspect. A 12mm spanner holds the spindle for bit changing and the router itself works fine. Has done everything I wanted to and with decent router bits I see a lot of use from this affordable and perfectly capable machine
Date published: 2016-03-24
Rated 4 out of 5 by from Cracking Kit I think for the price this is a great bit of a kit. It spins up and it cuts! I found easy enough to move about the work piece handheld and also I have mounted it under a table. The lack of an ON button lock means a cable tie needs to be used. The one thing that did let it down was the screw quality holding the base in position, one was cross threaded and due to the soft metal of the screws i just couldn't shift the other without rounding the heads. Instead to mount it under the table i used the parallel fence bars to create a clamping point for some makeshift wooden block clamps. Overall for a wannabe DIY'er it's a great purchase for the price.
Date published: 2016-03-22
  • y_2016, m_12, d_2, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_60
  • loc_en_GB, sid_31457, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie