Energer ENB518HTL 200W Multi-Cutter 240V Product Code: 61122

€63.95
Easy to use multi-cutter with 3.2° oscillation angle for sawing, scraping and sanding.

Features

  • 200W
  • Variable Speed
  • Cutting Action
  • Slide On/Off Switch
  • Rubber-Overmould Grip
  • 18-Piece Accessory Kit

Specifications

No. load speed: 11,000-20,000opm. Overall length: 286mm. Weight: 1.4kg. Will require adaptor (Code 28127) to use Bosch or Erbauer accessories. Includes Plug.
Additional Information
Technical Specification
  • Brand : Energer
  • Product Length : 286 mm
  • Product Type : Multi-Cutter
  • Power Output (Watts/Kw) : 200 W
  • Corded or Cordless : Corded
  • Total Product Weight : 1.4 kg
  • Model No : ENB518HTL
  • Pack Size : 1
  • Switch Type : Slide On/Off Switch
  • No Load Speed : 11,000-20,000 opm
  • Power Voltage Supply : 240 V
  • Carry Case/Bag Included : Yes
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
ENB518HTL, 2 x dust extraction adaptors (32 and 35mm), 1 x plastic sanding pad (unperforated), 1 x 35mm end cut blade, 1 x 80mm HSS semicircular saw blade, 15 x sanding sheets (5 x 80 grit, 5 x 120 grit and 5 x 180 grit), 1 x spare small flange, 1 x hex key and canvas carry bag.
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€63.95 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Energer ENB518HTL 200W Multi-Cutter 240V is rated 4.2 out of 5 by 108.
Rated 5 out of 5 by from Never do DIY without this tool Why have I never had one of these before? I've just used it to cut out some floor boards for a wetroom floor former - perfect! Cuts close to the wall with ease. Where I would previously have had to use hammer and chisel, I was able to get a clean edge cut against the wall on 3 sides (about 3.5 meters in all) with this tool. Used it to cut out several half lap join in some framework too - so much easier than chiselling. Only done these two jobs with it so far, hence only 4 stars for reliability. Seems well built and sturdy though, so don't foresee any issues. Already feel I've had my moneys worth anyway.
Date published: 2017-08-20
Rated 5 out of 5 by from Great value with a case Has a handy vacuum adapter which didn't really fit my dyson but I managed to make it work which makes the job a lot tidier it worked really well cutting plasterboard and wood highly recomended
Date published: 2017-08-20
Rated 5 out of 5 by from one very handy tool very good value for money have used this for many tasks would not be without it , been used now for over a year now still going strong would recommend
Date published: 2017-08-02
Rated 4 out of 5 by from Multicutter Great tool for all the difficult jobs, like cutting scribed skirting and architrave and other jobs that can't be done with hand tools and a jigsaw.
Date published: 2017-07-28
Rated 5 out of 5 by from multi tool its a good tool for getting into areas your jigsaw can not get
Date published: 2017-06-12
Rated 1 out of 5 by from Energer multi tool 200W mains Burnt out after 1hr of getting it home even stopping regularly for cooling it
Date published: 2017-06-11
Rated 1 out of 5 by from Unusable Terrible. Purchased one and the screw that holds the blades in kept undoing itself. No matter how tight I done it within a minute it had loosened and the blades just jangle. I took it back and exchange it for another and it was the same. Ended up exchanging it for a different make
Date published: 2017-06-02
Rated 1 out of 5 by from Let down by critical detail The product had a design/manufacturing flaw which meant that the blade came loose after a few seconds. The blade is supposed to be located by a toothed spline which is sprung loaded so it can be pushed out of the way if alternative attachments are installed. Unfortunately the undercut on the locking flange nut was too shallow, so as the nut was tightened, it pushed the toothed spline out of the way leaving only friction to drive the blade. I tried another one in the shop and it had the same fault. So bought the next one up, which locks the blade just fine.
Date published: 2017-05-28
  • y_2017, m_9, d_20, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_108
  • loc_en_GB, sid_61122, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie