Energer ENB522TCB 450W Tile Cutter 240V Product Code: 61123

Suitable for cutting ceramic, quarry, terracotta, porcelain, marble and slate tiles. Supplied with 110mm diamond cutting blade and carry handle.


  • Max. Cut Depth: 23mm
  • 450W
  • Diamond Blade
  • Parallel Fence
  • Lock-On Switch
  • Plunge Cutting
  • Tool-Free Blade Change
  • Water Bottle Feed


Blade dia. 110 x 22.23mm bore. Table size W x L: 332 x 305mm. Bevel cuts: 0, 22.5 & 45°. No load speed: 5400rpm. Weight: 3.7kg. Max. cut at 90°: 23mm. Max. cut at 45°: 16mm. Includes Plug.
Additional Information
Technical Specification
  • Brand : Energer
  • Cutting Depth Capacity : 23 mm
  • Product Height : 100 mm
  • Product Length : 365 mm
  • Product Type : Tile Cutter
  • Power Output (Watts/Kw) : 450 W
  • Corded or Cordless : Corded
  • Total Product Weight : 3.7 kg
  • Model No : ENB522TCB
  • Product Width : 345 mm
  • Disc Bore Size : 22.23 mm
  • Manual or Powered : Powered
  • Pack Size : 1
  • Blade Diameter : 110 mm
  • Carrying Facility : Heavy Duty Carry Case
  • No Load Speed : 5400 rpm
  • Power Voltage Supply : 240 V
  • Blade Description : Diamond Blade
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
ENB522TCB, 1 x cutting fence, 1 x angle guide, 2 x spanners and 1 x diamond blade.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€38.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Energer ENB522TCB 450W Tile Cutter 240V is rated 3.5 out of 5 by 136.
Rated 3 out of 5 by from Could be better Three things stopped me from giving this cutter a better rating. The built in water reservoir is a pain. The only way to empty it when you're finished is to tip it right up on it's edge. That gets the water out but you've then to spoon out the sludge it's created. The blade guard stops you opening the water compartment fully. The cover for the compartment can be taken off quite easily though so that solves that problem. The biggest bugbear was the long tile guide. Mine has a 3mm bow in the middle so my first tile slipped under it and was spoiled. Despite that ..... find me a better cutter at the price.
Date published: 2017-10-01
Rated 1 out of 5 by from Not what I had hoped for. I am keen on DIY, and have carried out tiling many times using electric tile cutters in the past. On this occasion I decided to purchase a new tile cutter for myself. It is with great disappointment that I must say that this is the worst tile cutter I have used. My reasons are as follows; Plastic guide bar - This is extremely flimsy and it flexes when cutting, which leads to inaccurate cutting. The bar is held in position by tightening two thumb screws, which when tightened to extremes, still don't hold it tight. Table extension - Located by two plastic sections which pop out when pressure is put on the extension. Again, all too flexible. Blade guard - Rests on the tile, making it impossible see a line on the tile. Other cutters allow you to adjust its position.
Date published: 2017-09-30
Rated 4 out of 5 by from Life Saver As a first-time tiler, I can honestly say this product saved me a LOT of frustration. After quickly realising that I was terrible at manually cutting tiles, the clean edges that I get from using this machine makes the whole ordeal worthwhile. The machine works great, but I needed to use a speed square to make sure the guide was straight when setting up for a cut. It quickly becomes messy, so keep wiping away the residue after your cut (and wear protection, so small ceramic shards don't cut your fingers!)
Date published: 2017-09-12
Rated 2 out of 5 by from Works very well, doesn't last! Very pleased with the operation of this machine, used it to cut a few tiles for the kitchen last year, works very well. Stored in original packaging since and motor has now burnt out after 30 seconds of using it for the second time. Very dissappointed to hear I cannot by spares too!
Date published: 2017-09-11
Rated 4 out of 5 by from Electrician's Review For the price you can't beat it, it's plastic, the cutter has a slight misalignment when rotated and guides are quite stiff to get into position and clamp tight. But I bought this to get me out of a problem with cutting angles on oggie edging tiles which it did beautifully and cheaply.
Date published: 2017-09-11
Rated 1 out of 5 by from Energer tile cutter Bought on line, fantastic overnight delivery from Screwfix. If only the machine was as good, extremely disappointing, simply not possible to obtain a straight cut. You end up with a variation of up to 3 mm. As for the blade it does not cut it chews and you end up with ceramic slinters all over. Purchased on a Thursday returned the following Monday. Absolute rubbish.
Date published: 2017-09-04
Rated 4 out of 5 by from Great product, durability ??? Great product for the price, tiled nearly the whole bathroom using it but the first one I bought started smoking and arcing may have just been a one off problem. Overall a perfect product for the one off tiling project, the only cut I couldn't do was a 45 degree cut in a tile i had shaped to go around a built in shelf, but full tile and corners at 45 degrees look perfect without the need for a corner trim
Date published: 2017-09-01
Rated 4 out of 5 by from Tile. Cutter Great little tile cutter. Saves loads of time and gets good results. Only thing I didn't like as much as my old one was the water reservoir in built in to the unit. Good price and quality for the money.
Date published: 2017-08-20
  • y_2017, m_10, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_136
  • loc_en_GB, sid_61123, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie