Erbauer Biscuit Jointing Kit ¼" 47mm 4 Pcs

Product Code: 65290
Erbauer Biscuit Jointing Kit ¼" 47mm 4 Pcs
Product Code: 65290
€27.45
4 Piece Set. ¼" shank. Enables slots to be produced for 0, 10 and 20 biscuits by changing the bearing.

Features

  • Microgranular Carbide Tip

Specifications

Cutting diameter: 47mm. Cutting width: mm. Cutting depth: 12.5mm.
€27.45 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Erbauer
  • Cutting Depth Capacity : 12.5 mm
  • Product Type : Biscuit Jointing Kit
  • Total Product Weight : 170 kg
  • Pack Size : 1
  • Shank Size : ¼ "
  • Cutting Diameter : 47 mm
  • Pieces in Pack/Case : 4
Product Contents
Cuttter and 3 x bearings (8 x 22, 8 x 26 and 8 x 30mm).
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Erbauer Biscuit Jointing Kit ¼" 47mm 4 Pcs is rated 3.7 out of 5 by 9.
Rated 5 out of 5 by from Making life. Easy Brilliant product for DIYrs or experienced tradesmen. Highly recommend.
Date published: 2016-05-11
Rated 1 out of 5 by from Cuts too wide a slot. I just want to confirm what others are saying about cutting too wide a slot. I have been using biscuit joints regularly for the past fifteen years, and use them to align the material as well as join it. I agree with others about the glue swelling the biscuits, but this cuts a slot that is far too wide. I will definitely be returning this. Not fit for purpose
Date published: 2016-05-07
Rated 5 out of 5 by from Great value cutter Cuts grooves for 3 sizes of biscuit (simply change the bearing- large bearing for small biscuit etc). The cut is very clean. Great value at the price.
Date published: 2015-11-23
Rated 5 out of 5 by from Cuts like a hot knife ..... Using this tool with my router to create biscuit slots in IPE decking for the hidden fixings. Have heard stories of how IPE basically laughs in the face of cutting tools. This cutter laughed in the face of IPE. Cuts the slot with no problems - all clean with no burning or blunting of the edge - Cheaper than buying a dedicated biscuit cutter :)
Date published: 2015-07-10
Rated 4 out of 5 by from Biscuit cutter Overall good quality cutter. Nice snug fit on biscuits but not too tight. Very pleased for the price
Date published: 2015-04-22
Rated 2 out of 5 by from SLACK fit Cutter is about 0.5mm too wide, and if you add in ANY wobble during the cut that gives you a slot 1mm over wide. So when you clamp 2 planks together, the drift can be up to 2mm. This is real, I clamped up some oak boards today and was very frustrated by how much they drifted. Its going to take me many many hours to plane the boards flat now. Any argument about the 'slot is slack to allow for the biscuit swelling' is talking rubbish. By the time the biscuit has swelled up your boards are already clamped up out of line. The whole point of the biscuit cutter is to align boards accuretely, not +/- 2mm !! Otherwise, its really good: if you are not that bothered about alignment then rush out and buy.
Date published: 2014-10-16
Rated 5 out of 5 by from Erbauer biscuit jointing kit Boben is correct - biscuits are designed to be a slack fit in the slot when dry and then swell to form a tight fit as they absorb the glue. But to achieve swelling, its essential that a water-based glue such as PVA is used. Solvent based or non water-based glues will not cause swelling, and while they might still act as gap fillers and secure the biscuit when the glue hardens, the joint will not be as strong or rigid as with a swollen biscuit.
Date published: 2013-10-27
Rated 3 out of 5 by from Erbauer Biscuit Jointing Kit The review by 'ViggenBoy' is misleading in stating that the biscuits are not a tight fit (don't be embarrased fella - it's a common misconception) the biscuits will always be slightly loose on first inserting them, they are however, designed to swell on contact with the glue to provide a tight joint. Once the glue is dry, you should have a strong joint. Just ensure that the diameter of the bit will pass through the sole plate of your router.
Date published: 2009-05-01
  • y_2016, m_12, d_2, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_65290, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie