Erbauer Rubber Air Hose 10mm x 10m Product Code: 1583H

€17.45
10mm bore, reinforced rubber air hose. ¼" female fittings. Remains flexible even at temperatures as low as -20°C.

Features

  • ¼" BSP Taper Female Inlet
  • Working Pressure: 21bar
  • Hose

Specifications

Max. operating pressure: 300psi.
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Length : 10 m
  • Product Type : Air Hose
  • Total Product Weight : 2 kg
  • Connection Type : ¼" BSP Taper Female Inlet
  • Pack Size : 1
  • Product Diameter : 300 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€17.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Erbauer Rubber Air Hose 10mm x 10m is rated 4.1 out of 5 by 25.
Rated 5 out of 5 by from Great quality bit of Kit Invaluable bit of kit to extend range of air tools sturdy hose so don't mind dragging it about a bit either
Date published: 2017-08-20
Rated 5 out of 5 by from Good value Great product good value as always should last for years.
Date published: 2017-08-19
Rated 4 out of 5 by from Hi-Flow hose for Impact Driver Bought this because of its bigger bore. I have a 20M hose that works fine with all my other tools, but with only an 8mm bore, it would not spin my Impact Driver fast enough to work. Read online that you need Bigger bore for Impact Drivers, so bought this one, with a ~9.5mm bore. Made a massive difference to my old Driver, and made my new Driver really sing! It will take anything off now! Advice when assembling: the threaded nuts spin round a captive "mushroom" on the ends of the hose. It is the seal against this mushroom that hold in the air,not the threads. So use PTFE tape but overhang the thread a few mm and fold the PTFE over the end of your 1/4" BSP fitting, so the actual flat face of the fitting is what makes the seal. Doing this gave me perfect seals with low assembly force. Reliability too soon to say, but good so far. Enjoy!
Date published: 2017-08-13
Rated 3 out of 5 by from ITS GAS HOSE ITS NOT AIR HOSE ITS GAS HOSE FOR BBQ. Check the fittings. You are adviertising hose thats for gas and the mathcing fittings DONT FIT, and you dont have any that do in stock.
Date published: 2017-08-02
Rated 5 out of 5 by from Very good quality hose Nice heavy duty hose large bore great for high demand air tools.
Date published: 2017-07-25
Rated 5 out of 5 by from Good heavy duty hose A good quality hose that will not kink or twist and that will remain flexible when the weather gets cold.
Date published: 2017-03-29
Rated 1 out of 5 by from No good First appearance it looks good quality and well made, however after fitting it and using it for a few week the rubber started to split and the end to the tool it's used on started to leak. Not impressed.
Date published: 2017-03-29
Rated 1 out of 5 by from Very poor quality Seemed a good a hose at a decent price but upon opening it, one of the end fittings just fell off the hose! Clearly a bad crimp on the end but could have been very dangerous if it was connected to air. I returned the hose and went elsewhere.
Date published: 2017-02-24
  • y_2017, m_9, d_25, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_GB, sid_1583H, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie