Evolution Rage Multipurpose Saw Blade 210mm Product Code: 58779

Unique, multipurpose blade featuring Rage patented technology. Cuts steel, aluminium, wood and plastic and cuts easily through nail-embedded wood.


  • Cuts Steel, Aluminium, Wood & Plastic
  • Cutting Width (Kerf): 1.7mm
  • Tungsten Carbide-Tipped Teeth
  • Rake Angle:
  • Anti-Kickback Design


Diameter 210mm. Cutting bore 25.4mm.
Additional Information
Technical Specification
  • Brand : Evolution
  • Product Thickness : 2.5 mm
  • Product Type : Circular Saw Blade
  • Suitable Application : Cuts Steel, Aluminium, Wood & Plastic
  • Total Product Weight : 0.308 kg
  • Model No : RAGE210TCT
  • Disc Bore Size : 25.4 mm
  • Pack Size : 1
  • Type of Cut : General Purpose
  • Number of Teeth : 24
  • Product Diameter : 210 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Cutting Width : 1.7 mm
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€31.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Evolution Rage Multipurpose Saw Blade 210mm is rated 4.3 out of 5 by 35.
Rated 5 out of 5 by from TCT blade This blade will cut most things that you want to do it lasts a long time if you take care and clean after use.recommended
Date published: 2017-11-03
Rated 5 out of 5 by from Excellent Blade Had the original blade for several years and still does its job. However l purchased this new one as I had some precision cuts on laminated kitchen trims to do and the old one was not doing a fine enough cut. New blade did all the work perfectly. I'll be keeping that one for best and putting the old one back for rough work.
Date published: 2017-09-06
Rated 5 out of 5 by from Great blade Cracking little blade. Have made at least 100 cuts with it so far and it hasn't missed a beat. As long as you back your cut with a piece of scrap timber breakout shouldn't be a problem. As good as dewalt blades I've used.
Date published: 2017-08-10
Rated 5 out of 5 by from Great saw blade Best blade for your chop saw this is the only blade you need for your chop saw
Date published: 2017-08-07
Rated 5 out of 5 by from Quality blade Great new blade. You forget how good a new blade is!
Date published: 2017-07-28
Rated 5 out of 5 by from Astonshing Blade I have had one of Evolution's blades in my saw for a year now. Used it to cut up a steel scaffold pole! Quicker than a knife through butter! It has since sawn through 72 oak sleepers and it is still going strong! Also a formica worktop was sliced through (upside down of course!) with a perfectly clean cut that needed no dressing.
Date published: 2016-04-13
Rated 5 out of 5 by from Very Muppet-tolerant! Works well, cuts fast in wood and plastic, and reasonably well through mild steel - I've just cut up half a tonne of 50 mm square tube with mine. I've just replaced the original blade, which lasted 3 years and 14 shows, so it has done a fair bit of work. Best feature on a saw used by a varying team of people, ranging from competent, through novice, to Muppet, is the ability to cut through an embedded nail or screw without any drama, or damage to the blade. Cuts true until it is completely worn out - only then does it start to wander. Definitely recommended.
Date published: 2016-03-21
Rated 5 out of 5 by from Excellent value for money This inst the cheapest multi cut blade on the market but it certainly is one of the better ones. Made my life a lot easier.
Date published: 2016-03-18
  • y_2017, m_11, d_13, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_GB, sid_58779, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie