Evolution RAGE3FP2552 255mm Single-Bevel Sliding Compound Mitre Saw 230V

Product Code: 26612
Evolution RAGE3FP2552 255mm Single-Bevel Sliding  Compound Mitre Saw 230VVideoView product video
Evolution RAGE3FP2552 255mm Single-Bevel Sliding Compound Mitre Saw 230V
Product Code: 26612
€181.95
The Evolution RAGE3 FP2552 2440V compound mitre saw comes complete with a TCT blade that can easily cut through wood, aluminium and steel, even if nails are still embedded in the material. The multipurpose blade cuts cleanly and leaves no burrs on steel, so you can work with it instantly. This tool is easy to assemble and use, as the laser cutting guide helps you get the highest possible accuracy in your work. The supplied clamp also keeps your workpiece in place and your hands free.

Features

  • 2000W
  • Max. Cross Cut: 300 x 75mm
  • 24-Tooth TCT Blade Included
  • Workpiece Clamp
  • Trench Cutting Facility
  • Die-Cast Aluminium Base
  • Spindle Lock
  • Soft Start

Specifications

Blade dia. 255 x 25.4mm bore. Max. mitre 45° left & 45° right. Max. bevel 45° left. Mitre stops 0, 15, 22.5, 30 & 45°. No. load speed: 2500rpm. Weight: 17.9kg. Includes Plug.
€181.95 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Evolution
  • No. of Bevels : Single-Bevel
  • Cutting Depth Capacity : 75 mm
  • Power Output (Watts/Kw) : 2000 W
  • Model No : RAGE3FP2552
  • Blade Diameter : 255 mm
  • No Load Speed : 2500 rpm
  • Power Voltage Supply : 230 V
  • Number of Teeth : 24
  • Carry Case/Bag Included : No
  • Blade Description : TCT Blade Included
  • Pieces in Pack/Case : 1
  • Product Type : Compound Mitre Saw
  • Mitre Saw Bevel Slide : Sliding
  • Corded or Cordless : Corded
  • Total Product Weight : 17.9 kg
  • Disc Bore Size : 25.4 mm
  • Colour : Black/Orange
  • Pack Size : 1
  • Manufacturer Guarantee : 3 Year Manufacturer's Guarantee (T&Cs Apply)
Product Contents
RAGE3FP2552, TCT blade, 2 x hex keys, instruction manual, quick-start guide, top clamp.
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Evolution RAGE3FP2552 255mm Single-Bevel Sliding Compound Mitre Saw 230V is rated 4.5 out of 5 by 258.
Rated 5 out of 5 by from Just brilliant Excellent saw that flies through cuts. It was pretty much spot on straight out of the box and ready to go in minutes. Only been cutting wood so far, but can vouch for its ability on metal as I forgot to move the fence aside when doing a 45. Flew through without me notice any added resistance. :)
Date published: 2017-04-09
Rated 5 out of 5 by from Just buy one. Out the box this saw looked and felt good quality. Most of my tools are either Makita for the cordless 18V gear or dewalt for my table saw etc hence I was a little bit skeptical about buying this but I am definitely not disappointed. The build quality is fantastic. As other reviewers have said, allow 2 hours or so to unpack and calibrate it. If you don't already own a set square with 90 and 45 degree angles on it then buy one as the saw does need calibrating before use. I found the 90 was pretty well set at 89 degrees but the 45 was more like 40. There's two set screws on the back to adjust the angle. After the angles are set then adjust the marker lines (one philips screw) so they lign up correctly then set the laser. I found the easiest way to set the laser was to tape a piece of paper to the cutting deck and mark the left hand edge of the blade with a sharp pencil then adjust the laser to match. Overall very happy and I couldn't ask for more.
Date published: 2017-04-06
Rated 5 out of 5 by from Great product Value for money & accurate settings, easily set up. Happy with the product.
Date published: 2017-04-05
Rated 5 out of 5 by from Great bit of kit I have hade this bit of kit for over a year now and it's done loads of work although only used on timber , the blade is still good as I do lots of stud work it's also still cutting the miters neat on architrave etc I got this one as my Dewalt finally packed up after years of hard work, As I am nearing retirement age I decided to risk buying a cheaper version of Dewalt but this Evelution is every bit as good and as Iv decided to keep going for a few more years it should see me out, Don't hesitate to buy it a little Gem
Date published: 2017-03-12
Rated 4 out of 5 by from Very good. Easy to assemble I bought it two weeks for doing a few small jobs that I needed a sliding saw for. Only cut new wood and bit of perspex.
Date published: 2017-03-11
Rated 5 out of 5 by from Mitre saw It is a great product but unhappy that i then need to purchase a dust bag separately. It reminds me of the days when you use to get home with a new printer only to find that a lead was not sold with the item.....arrg. And to boot, Screwfix have dust bags on their website, but none in any stores and none for delivery......poor!
Date published: 2017-03-08
Rated 4 out of 5 by from Very good, but.......... Overall I'm pleased with this purchase, however there are a few 'issues'. Firstly, on initial assembly I found that the knurled screw for the cable clamp was a completely different thread size to the hole it was meant to screw into ! A minor niggle I know, but not what I expected and it meant I had to find an alternative screw and open out the hole in the plastic clamp to accommodate this larger screw. Also, the laser guide is not very accurate. Apart from these minor grumbles I'd say it's a reasonable saw for the money - it is after all a 'budget' compound mitre saw and if you want Festool or DeWalt quality you'll have to shell out quite a bit more money !
Date published: 2017-03-08
Rated 4 out of 5 by from Good functional saw Saw was straightforward to put together, instructions clear. Needed minor adjustments for alignment. Once setup seems to work well certainly powerful enough, bevel function good but need to keep the fence well back. When mounted on Saw table you cannot cut 45 deg mitres as saw mounting brackets inhibit movement. Not difficult to resolve (modify brackets) but a time cost when you find out in the middle of a job.! Cannot state reliabilty as I've not had it long enough.
Date published: 2017-03-08
  • y_2017, m_4, d_22, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_256
  • loc_en_GB, sid_26612, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie