FloPlast 492203 MDPE Female Adaptor 25mm x ¾"

Product Code: 11625
FloPlast 492203 MDPE Female Adaptor 25mm x ¾"
Product Code: 11625
€3.75
High quality compression fitting for MDPE pipe. 25mm MDPE to ¾" BSP female thread. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. MDPE Fittings are WRAS approved, certificate number 0507060.
€3.75 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : MDPE Female Adaptor
  • Total Product Weight : 0.06 kg
  • Model No : 492203
  • Pack Size : 1
  • Product Diameter : 25 mm
  • Pieces in Pack/Case : 1
  • Thread Size : ¾ "
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
FloPlast 492203 MDPE Female Adaptor 25mm x ¾" is rated 4.5 out of 5 by 4.
Rated 5 out of 5 by from Good quality at a good price What can I really say about a simple adaptor like this - I bought it to connect 25mm MDPE pipe to a 3/4" male thread on an expansion vessel for my irrigation system, it does the job, was inexpensive, and most importantly was actually in stock when I wanted it!.
Date published: 2011-08-17
Rated 5 out of 5 by from Good quality at a good price What can I really say about a simple adaptor like this - I bought it to connect 25mm MDPE pipe to a 3/4" male thread on an expansion vessel for my irrigation system, it does the job, was inexpensive, and most importantly was actually in stock when I wanted it!.
Date published: 2011-08-17
Rated 4 out of 5 by from Care Required Solid product but I found real care was required when screwing brass BSP into the plastic of the female socket. Plenty of PTFE tape required to get a pressure-tight joint, but easy to cross-thread if too much was used.
Date published: 2010-07-16
Rated 4 out of 5 by from Care Required Solid product but I found real care was required when screwing brass BSP into the plastic of the female socket. Plenty of PTFE tape required to get a pressure-tight joint, but easy to cross-thread if too much was used.
Date published: 2010-07-16
  • y_2016, m_12, d_5, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_11625, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie