Fluidmaster Bottom-Entry Brass Shank Fill Valve ½"

Product Code: 47792
Fluidmaster Bottom-Entry Brass Shank Fill Valve ½"
Product Code: 47792
€17.95
Brass shanks. Height adjustable from 9 to 14". Works well with high or low pressure. Durable materials stand up to millions of flushes.

Features

  • Simple to Install without Special Tools
  • Fast Refill with Absolute Shut-Off
  • Easy to Access & Simple to Change
  • Compact Efficient Design, Fits Today's 6-Litre Cisterns
  • Anti-Siphon / Backflow Design Prevents Contamination
  • Also Available with a European 3/8" Shank
  • Easy to Access & Simple to Change
  • Compact Efficient Design, Fits Today's 6-Litre Cisterns
  • Anti-Siphon / Backflow Design Prevents Contamination
  • Also Available with a European 3/8" Shank

Specifications

WRAS approved.
€17.95 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Compatibility : Bottom-Entry Cistern ½"
  • Brand : Fluidmaster
  • Product Height : 9-14 "
  • Product Type : Brass Shank Fill Valve
  • Construction Material (Plumbing) : Plastic & Brass
  • Product Width : 90 mm
  • Pressure Suitability : Suitable for High & Low Pressure Systems
  • Product Depth : 70 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Toilet Fitting Type : Fill & Flush Valves
  • Thread Size : ½ "
Product Contents
Bottom inlet fill valve and fittings.
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Fluidmaster Bottom-Entry Brass Shank Fill Valve ½" is rated 4.7 out of 5 by 247.
Rated 3 out of 5 by from Could be better Should have been an easy fit, and it was, 5 minutes to do but the new unit had a faulty seal and kept filling and wouldn't shut off! Had to salvage the seal off an old unit to make it work. Also not the quickest to fill either. In theory a good unit and mine was probably just a rogue one but it c-cked up what should have been a quick and simple job.
Date published: 2017-06-06
Rated 3 out of 5 by from Does the job but... Buy the (much cheaper) Flomaster one as this is not any better. In fact, I had to replace it as the mechanism takes up a fair amount of space and, with the old fashioned siphon, the float kept sticking - causing a big overflow. I'm sure it's ok if you have the space but the Flomaster does the job nicely for less than half the price,
Date published: 2017-05-25
Rated 5 out of 5 by from Excellent product Bought this as a replacement for a leaking Fluidmaster bottom entry fill valve with the plastic shank that was leaking after 15 years of use. Due to the decent life span of the old one I decided to stick with this product. This was easy to fit with no leaks and I used a 15mm X 1/2" flexible tap connector with valve (Screwfix number 3558G) to connect up to the mains water supply.
Date published: 2017-05-22
Rated 5 out of 5 by from Very good product This is the king of fill valves, if you want it to work first time and last longer than the toilet then get one of these. Only issue can be on some cisterns the feed hole is too close to the side or in the corner so the float can catch on the side and prevent it shutting off. In this case Screwfix also do a cheaper brass shanked fill valve made by Flomasta with a shielded float, the shank on the flomasta is short though so some wiggle room needed on the feed pipe.
Date published: 2017-05-15
Rated 5 out of 5 by from Very Good DIYer but fiddled with loads of other types over the years on mucky existing cisterns and always been troublesome and often resorted to sealant to stop a drip. This one went straight in no sealant and no drips. Fills very quickly and quietly, the negative reviews that said took ages to fill must have been faulty or they hadn’t opened a valve properly or something.
Date published: 2017-05-10
Rated 3 out of 5 by from Slow to fill One of the other reviewers was right, the filling rate seems to be very slow, as he said about 6 minutes to fill the cistern with pressure from a roof tank. Otherwise it seems to be fine - brass shank much better than plastic, the reason i bought this was that the existing plastic shanked one got cross-threaded when I tried to refit it.
Date published: 2017-05-04
Rated 5 out of 5 by from Far better than the original Purchased this at the brand new Wishaw store very impressed to have a screwfix local now, The fluid master brass shank valve was excellent value and easy to fit a 10 min job and the brass shank helps less of the cross threading you get with the plastic.
Date published: 2017-04-22
Rated 4 out of 5 by from Good generic valve I needed to replace a valve for a customer. I always use brass shank valves. This one has adjustable height. A bit chunky at the top so you may struggle fitting it to some cisterns. Reliability: too early to say but going by previous use, it should be good. Brass shanks might cost a few pounds more but so much better than plastic. A slight downside is the brass shank doesn't have a bit shaved out to grab the shank with a spanner to ease fitting even more. Some Fuidmaster and other brands have this.
Date published: 2017-04-14
  • y_2017, m_6, d_23, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_247
  • loc_en_GB, sid_47792, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie