LAP Anti-Vandal Bulkhead Wall Light Black 240V

Product Code: 31250
LAP Anti-Vandal Bulkhead Wall Light Black 240V
Product Code: 31250
Polycarbonate. Prismatic diffuser.


  • IP54
  • Non-Dimmable
  • 1 Year Manufacturer's Guarantee
  • Modern Design


240V. W x D x H: 240 x 119 x 110mm. 1 x ES lamp required. 1 x conduit entry point. Max. 60W Fixings supplied. Weight: 1kg.
€12.45 Incl. 20% VAT
Add to Wishlist

Included in this price is a contribution to recycling costs of €0.15 (€0.12 ex VAT)

Additional Information
Technical Specification
  • Resistant Type : Waterproof
  • Brand : LAP
  • Product Height : 110 mm
  • Product Type : Anti-Vandal Bulkhead Wall Light
  • Power Output (Watts/Kw) : 60 W
  • IP Rating : IP54
  • Fixings Supplied : Fixings supplied
  • Cap Fitting : ES
  • Total Product Weight : 1 kg
  • Model No : 1052A
  • Design Type : Modern Design
  • Product Width : 240 mm
  • Dimmable : Non-Dimmable
  • Colour : Black
  • Product Depth : 119 mm
  • Pack Size : 1
  • Max. Wattage : 60 W
  • Power Voltage Supply : 240 V
  • Manufacturer Guarantee : 1 Year Manufacturer's Guarantee
  • Pieces in Pack/Case : 1
  • Adjustable : Fixed
Product Contents
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

More Items to Consider

More Items to Consider

Loading... Loading...
LAP Anti-Vandal Bulkhead Wall Light Black 240V is rated 3.657142857142857 out of 5 by 35.
Rated 2 out of 5 by from Works - eventually What a faff. First off Had to dismantle the insides to fit conduit and get decent 1.5mm cable access. Ok my fault for using the knockout behind the lamp holder. Next find that one of the connection terminals had split. Not enuf metal. By a real slice of luck I had an old bulb holder (from 1982!) that I had taken out earllier and left in the van and was exactly the same pattern once I'd drilled the mounting rivets out of it. Then find all the non captive screws that had dropped out and reassemble. 30 mins turned into a couple of hours. I mean it works - it's a light so it darn well should - but not sure I want to fit Another one soon.
Date published: 2016-09-24
Rated 2 out of 5 by from Poor build quality The bulb fitting started falling apart whilst attaching the cable to it. On closer inspection, the terminal blocks are mounted to the bulb fitting by flimsy brass/copper rivets with no other means of support. Luckily I managed to use the bulb fitting from the unit this light replaced. Also, the lense is attached by four small screws which are not captive so easily drop out when removing. Cheap unit.
Date published: 2016-06-21
Rated 4 out of 5 by from Bulkhead light Bought two of these to fit on a cellar ceiling. They were relatively easy to fit and provide a reasonable amount of light given I have 60w bulbs in them. Might have been better getting ceiling lights, but they do a job and that's all I wanted them for.
Date published: 2016-04-08
Rated 3 out of 5 by from Poor design Typical LAP. OK but not quite there. Cable entry at rear couldn't be used and was fitted with a grommet that was split so had to replace to avoid water ingress. Other knockouts don't come out clean but worst of all the knockout at the bottom doesn't give sufficient space under the lamp holder fitting to get a gland nut on. Plus the gland nut on the outside was obstructed by the case molding. Had to plug it and use side entry. Makes me wonder if LAP designers have ever fitted their products.
Date published: 2016-02-14
Rated 4 out of 5 by from Bulkhead heaven Very good quality light with back entry for cable available
Date published: 2016-02-02
Rated 5 out of 5 by from Bulkhead light A good value weatherproof light which takes any E27 lamp including CF and LED.
Date published: 2015-12-10
Rated 4 out of 5 by from Let down by screws. Good product. Have used two and both easy to fit etc. Only downside is the small screws supplied to fit bulkhead to wall. They are just not long enough. Use the screws supplied and a vandal's baby sister could knock the light off the wall with her little finger. Apart from that they are OK.
Date published: 2015-10-09
Rated 4 out of 5 by from Its a light.... and cheap Looks ok, my electrician thought they were easy enough to fit, though he thinks he'll be back in a year or so to replace them.
Date published: 2015-09-14
  • 2016-10-24T07:42CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_GB, sid_31250, PRD, sort_mostRecent
  • clientName_screwfix-ie