LAP LED Tape Flex Striplight Cool White Product Code: 78616

Microflex polymer film with embedded LEDs.


  • Non-Dimmable
  • IP20
  • Max. 12W
  • Cool White
  • 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Low Energy


240V. W x D x H: 8 x 3 x 5mm. . Integrated LEDs. Fixings & Fittings Supplied. 3 Year Manufacturer's Guarantee (T&Cs Apply) year manufacturer's guarantee.
Additional Information
Technical Specification
  • Brand : LAP
  • Energy Rating : A++
  • Manufacturing Standards : EN 60598
  • Product Height : 5 m
  • Product Length : 5 m
  • Product Thickness : 3 mm
  • Product Type : LED Tape Flex Striplight
  • Power Output (Watts/Kw) : 7.5 W
  • IP Rating : IP20
  • Colour Temperature Description : Cool White
  • Life Length : 25,000 hours
  • Fixings Supplied : Fixings & Fittings Supplied
  • Cable Length : 5 m
  • Total Product Weight : 0.45 kg
  • Construction Material (Lighting) : Plastic
  • Model No : 52425
  • Lamp Type : LED
  • Product Width : 8 mm
  • Dimmable : Non-Dimmable
  • Colour : Cool White
  • Product Depth : 3 mm
  • Pack Size : 1
  • Max. Wattage : 12 W
  • Lm : 900 lm
  • Power Voltage Supply : 240 V
  • Manufacturer Guarantee : 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
5m LED tape, LED driver, fixings and plug.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€32.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
LAP LED Tape Flex Striplight Cool White is rated 3.8 out of 5 by 17.
Rated 5 out of 5 by from Led lights Excellent product and excellent service from the staff up peterlee
Date published: 2017-07-21
Rated 5 out of 5 by from Worktop lighting Best worktop lihting we have ever had! Sufficiently bright light, very even, and very easy to fit. Hid the plug out of sight on top of th ecupboards.
Date published: 2017-02-10
Rated 4 out of 5 by from ever bright Bought these lights to replace under cupboard tube lights. Very good quite easy to fit remembering that they must be in one plane cannot take from horizontal to vertical. in one run. Very bright .Reliability cannot be judged as only recently fitted.
Date published: 2017-01-25
Rated 4 out of 5 by from Simple efficient installation So easy to install and connect. Needs a switch but very effective.
Date published: 2017-01-11
Rated 1 out of 5 by from Not as shown in the catalogue Wasted trip into town to get this and job delayed. Catalogue shows the driver as separate from the plug hence suitable to wire into a lighting circuit. In reality the driver and plug are a single block making it unsuited to hard wiring to a lighting circuit. I could have ditched the driver and bought another but that would have make the led tape a very expensive buy. Representation and misrepresentation are important Mr Screwfix.
Date published: 2016-12-24
Rated 5 out of 5 by from Easy to fit lights A good priced set of lights. Easy to install under kitchen cupboards. Simply stick on plug in and you are good to go!!!. My task was complete in half an hour. Simples!!!
Date published: 2016-10-25
Rated 5 out of 5 by from Very bright kitchen lights I read the earlier reviews before buying one set to test them out as I needed three sets in total maybe even four, based on the specifications which states you can't extend them. But unclear whether you could cut and use them with an LV cable extension. I have a custom built half cabinet on one side of my sink and two doubles on the other side. It seemed a terrible waste to have the LED lights go up over the top of the cabinet, above the sink then down the back of the half cabinet. It would have also left me with very little lights to place under the cabinet. So I wanted to see if I could extend the lights to allow me to use LV cable to cover the distance on top of the cabinets where you wouldn't see any lights. I took off one 10cm strip and soldered wire between the cut section and the main LED strip. It worked. Fantastic. So I ran an LV cable over the tops of my cabinets and soldered the LV cable to both cut ends. Note the plastic film strip the LEDs are sitting on is easily heated and I was worried of over heating the strip. So I placed dots of solder onto the tiny + and - copper connectors at the end of each cut strip so it was easier (and safer) to apply the LV cable to the LED strip. Also instead of cutting the LED strips I doubled up the amount of lights under my cabinets. One row at the front and another row at the rear. But going round corners was a nightmare. Solution was to super glue the front and back rows, giving them plenty of time to dry and ensure they were attached solidly, then superglue the the small strip down the side. I tried and failed to stick the corners, so I concentrated on the sides. I have since bought two more sets. Really bright clean light emitted.
Date published: 2016-09-22
Rated 2 out of 5 by from Great light, but easily damage Waskerley pleased using them on a start banister. But!!! The connection to the plug cable is very fragile. I just caught it lightly, the connection snapped and is irreparable. Will buy again, but will provide better protection.
Date published: 2016-08-07
  • y_2017, m_8, d_22, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_GB, sid_78616, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie