LAP Indoor Ceiling Flush PIR Product Code: 47121

Polycarbonate, flush-mounted ceiling PIR. Converts indoor lighting to motion sensor control.


  • IP44
  • 6m Detection Range
  • Adjustable Dusk-to-Dawn Sensor
  • Adjustable Time On
  • Manual Override
  • W x D x H: 90 x 90 x 70mm
  • Model No: IQ-SA-360-FM-D-W
  • Indoor & Outdoor Use


230V. 50Hz. IP44. Switching capacity: 2000W incandescent and 500W fluorescent. Fixings Supplied.
Additional Information
Technical Specification
  • Brand : LAP
  • Product Height : 70 mm
  • Product Type : Indoor Ceiling Flush PIR
  • IP Rating : IP44
  • Fixings Supplied : Fixings Supplied
  • Total Product Weight : 0.122 kg
  • Construction Material (Lighting) : Polycarbonate
  • Model No : IQ-SA-360-FM-D-W
  • Product Width : 90 mm
  • Colour : White
  • PIR : PIR
  • Product Depth : 90 mm
  • Pack Size : 1
  • Power Voltage Supply : 230 V
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
PIR and fixings.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€16.95 Incl. 20% VAT

Add to Wishlist

Included in this price is a contribution to recycling costs of €0.15 (€0.12 ex VAT)

LAP Indoor Ceiling Flush PIR is rated 4.4 out of 5 by 45.
Rated 4 out of 5 by from Another LAP product Large terminals makes for easier connections and they don't look that bad once they are installed. As far as LAP products go this is the only one I would buy again.
Date published: 2017-03-23
Rated 5 out of 5 by from Ceiling PIR (Flush Mount) Bought this to operate a light in the porch at the front door. Works brilliantly. The unit is easy to fit, easy to wire and easy to set up. While a little on the large size (75mm hole required) once fitted it does look neat and tidy. Oh if you remove it watch the springs they don't half whack your fingers!!
Date published: 2017-02-26
Rated 5 out of 5 by from Good product Easy to install, simple instructions, easy to set up!
Date published: 2017-02-02
Rated 2 out of 5 by from Manual override does not work The first one was purchased a few years ago and was used in my garage. The manual override never worked on that one and by the time I found that out it was too late to take back. Just purchased my second to one and it has the exact same problem. No good if you need this function.
Date published: 2017-01-28
Rated 5 out of 5 by from Automated lighting made easy Having installed similar units in our bathrooms I bought this one for our refurbished laundry room. With all new LED downlights this ensures the lights are only on when we need them. So saved twice; first by switching to LEDs and second by not leaving lights on when not needed. No electronic sensitivity but I did not need to use the sticker system to get the best result.
Date published: 2016-12-03
Rated 5 out of 5 by from Good value for money. Installed it in my kitchen. Works too good. Covers big area. Lights come on before we enter the kitchen. Easy to install. Big terminals.
Date published: 2016-12-03
Rated 1 out of 5 by from NOT GOOD FOR THE ENVIRONMENT!! I'm so annoyed with my self for not checking this when I wired in my first one, but all I can do now is make sure others are aware of this issue. Let me first of all say the good points I first started installing these because my daughter is disabled and when she is using her walking aid she doesn't have a hand free to turn on the light switch. They gave her independence to go where she wanted without someone to turn the lights on following her around. They worked so well we installed 9 around the house, and we thought we were being environmentally friendly, BUT .... NOW THE NEGATIVE ... then I put some batteries in our energy monitor (We hadn't been using it for a while) and these PIR sensors use 5-7watts each in standby there are some rooms where we only have one energy saving light bulb where we'd have been better just leaving the light on all night for her. because of the standby current there are very few situations where using one of these will be environmentally friendly. Over a 24hr period they use 120Wh (43.8KWh / Annum), a typical energy saving light bulb might be 7watts you could leave 2 on continuously for 8.5hours and you wouldn't have used as much as the PIR sensor did monitoring if the light needed to be on in the same 24hour period. To make these environmentally friendly you'd have to be leaving 60w's on unnecessarily for 2hours a day. In the age of the energy saving light bulb 60w is a lot of light. Having said all that if I have my figures right its only about £6 (£57 for our house) a year per PIR sensor, but don't kid yourself your being environmentally friendly. A small current 24 hours a day 365 days a year is worse than a big current for a short time each day. SCREWFIX please publish the standby wattage of your PIR Sensors.
Date published: 2016-11-25
Rated 3 out of 5 by from Manual Override Problem Wanted the manual override for my porch light with minimum wiring changes. The unit turns off manual override at dawn, but when the light was on in manual override the sensor was detecting enough light to think it was dawn :( I had the light sensitivity set on max dust initially, had to raise it. The symptom was the light only staying on for a shorter time in manual override than the automatic time I'd setup. May have been better, if I'd have gone for a double pole switch (intermediate switch) that way the manual overide PIR function would been used - as I can see the Mrs struggling with the mystic double on-off-on switching.
Date published: 2016-11-01
  • y_2017, m_6, d_27, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_GB, sid_47121, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie