FloPlast Mini Access Chamber Base 300mm

Product Code: 18837
FloPlast Mini Access Chamber Base 300mm
Product Code: 18837
€37.45
300mm dia. Flexible connections for all inlets allows 10° movement in any direction on 3 inlets. Chamber risers, cover and frame sold separately. Helps where connecting pipes are not perfectly aligned with MAC inlets. The variety of inlet combinations available for the MAC and the choices of Chamber Risers, 100mm (Code 18835) and 200mm (Code 11153) provides installers with a significant advantage when planning and installing a drainage system.

Features

  • 300mm Diameter
  • Fixed Outlet
  • Two Blanking Plugs
  • Max. Height of 600mm with Risers
  • 110mm PVCu
  • Ring Seal Joints
  • Suitable for Gravity Drainage & Sewerage

Specifications

Maximum depth of MAC 600mm (base + 1 x 100mm x 1 x 200mm risers) including lid.
€37.45 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Height : 300 mm
  • Product Type : Mini Access Chamber Base
  • Construction Material (Plumbing) : 110mm PVCu
  • Suitable Use Type : Suitable for Gravity Drainage & Sewerage
  • Total Product Weight : 2.89 kg
  • Model No : D801
  • Pack Size : 1
  • Product Diameter : 300 mm
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
FloPlast Mini Access Chamber Base 300mm is rated 4.4 out of 5 by 11.
Rated 4 out of 5 by from Good, but could be better. Although difficult to see from Screwfix's photo, this mini-access chamber has four ports, three of which incorporate the ability to swivel the connection by +/- 10degrees, which is very useful when connecting to existing pipe-work. It would have been even better if the outlet (the fourth port) was adjustable too. The hight difference between the lowest inlet and the outlet is not much (5mm), so you won't get much of a slope inside, but it should be OK.
Date published: 2016-11-02
Rated 5 out of 5 by from Great bit of kit This is a really useful and versatile chamber base. The swivel connections on the inlets help so much to line up pipes without having to buy extra bends. The extra tenner over the standard version with fixed inlets is well worth it in my opinion. Used with the risers and the cover and frame makes for a very easy and professional kit to quickly form an inspection access or junction in an existing pipe.
Date published: 2016-09-17
Rated 5 out of 5 by from perfect for the job A little more info in the off set of the inlets would have been helpful for planning pipe drops
Date published: 2016-09-04
Rated 5 out of 5 by from Making life easier Although I'm still at the stage of measuring and lining up I can see that this product will make fitting the WC for my en suite much easier than it might have been.
Date published: 2015-05-28
Rated 5 out of 5 by from Chamber base Does as it says, easy to install & to connect. The only criticism is the drop from the side entry to the bottom channel. This needs to be taken into account when working out the pipe fall. Would have preferred a smaller drop. Otherwise a good product!
Date published: 2015-03-10
Rated 5 out of 5 by from access chamber base 300m/m Used this base with the risers and cover to put in an already existing pipe run. Without the adjustable inlets it would be almost impossible to fit .I also used a slip coupling as well.I only needed to dig a hole about 600m/m. Well worth the bit extra to make the job easier.
Date published: 2014-05-19
Rated 5 out of 5 by from access chamber base 300m/m Used this base with the risers and cover to put in an already existing pipe run. Without the adjustable inlets it would be almost impossible to fit .I also used a slip coupling as well.I only needed to dig a hole about 600m/m. Well worth the bit extra to make the job easier.
Date published: 2014-05-19
Rated 4 out of 5 by from nice purchase good value, and great features with the adjustable inlets
Date published: 2010-05-31
  • y_2016, m_12, d_9, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_GB, sid_18837, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie