Outside Tap Kit 15mm x ½"

Product Code: 33139
Outside Tap Kit 15mm x ½"
Product Code: 33139
€14.45
½" BSP. Brass, self-cutting outside tap suitable for use with water. Simple DIY installation without the need for external pipework.

Features

  • Brass

Specifications

Working pressure: 1-5.5bar. Temperature range: 0-90°C.

Was €18.45

Special Price €14.45

Incl. 20% VAT

Save €4.00 (21%)

Add to Wishlist

Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Outside Tap Kit
  • Construction Material (Plumbing) : Brass
  • Bar Pressure : 1-5.5 bar
  • Pack Size : 1
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Outside Tap Kit 15mm x ½" is rated 3.9 out of 5 by 77.
Rated 3 out of 5 by from O/S tape kit This kit is easy to install. The self boring stopcock easy to use, but has such a small bore; ie hole for the flow of water that it greatly reduces the water pressure, in our case to useless. But we fitted the coupling to a dishwasher/washing macine tape which has a regular bore and the pressure was normal, ie unaffected. If you want normal tape pressure, dont use the stopcock fitting, find an alternative attaching point.
Date published: 2017-06-08
Rated 1 out of 5 by from Rusting after 1 month At first this setup seemed great, quality is good and it fitted easily. Initially had a very small leak at the neck of the tap which a few other people had, but sorted that with some leak sealer. After a couple of weeks we noticed that the indoor tap it was feeding from was running brown, lots of trying to diagnose the issue we removed the piercing connector and found it was black with rust and already had signs of serious corrosion, after replacing this with a push fit T connector it's been fine.
Date published: 2017-05-22
Rated 3 out of 5 by from Ok for light use Good for the price paid fitted two on the same week and ive found the hose that you have the jubilee clamp is ok but not water tight so plumbers tape is a must to seal it along with clamping it otherwise u wil have a constant drip from the connection other than that does what its says dont expect it to be able to assist a jet wash as water flow is average
Date published: 2017-05-18
Rated 5 out of 5 by from Garden tap kit Must say it was a quick simple installation without incident, no leaks and the pipe clamp was engineered correctly.
Date published: 2017-02-16
Rated 5 out of 5 by from Best buy One of my best buys yet and easy to fit for anyone.would recomend the product.
Date published: 2016-12-02
Rated 5 out of 5 by from outside tap kit simple and easy to fit took less than 30 minutes. would use again
Date published: 2016-11-25
Rated 1 out of 5 by from Rubbish Absolute rubbish. Self cutting tap wasn't up to the job - by the time I had tightened it to the maximum, all I got was a trickle of water out - think 60 seconds to fill a pint glass. Taking it all apart, the self cutting tap wasn't strong enough to cut standard 15 mm copper pipe - instead it had bent it, and made a small puncture on part of the cut circumference, instead of cutting out a complete disk as it should. The kit is waste of time, I spent twice as long removing it, buying the parts I should I bought in the first place and installing them. Don't buy this kit - it's cheap. Spend a few pennies and and few minutes more and do it properly.
Date published: 2016-10-16
Rated 5 out of 5 by from Outside Tap Great piece of kit. Really easy to fit in under 30mins. No leaks, everything you need in one box and clear instructions. I would recommend a 18mm SDS drill bit rather than the 16mm stated on the box though. Only just fitted so can't comment on reliability hence 4 stars.
Date published: 2016-10-04
  • y_2017, m_6, d_23, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_77
  • loc_en_GB, sid_33139, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie