Perko Concealed Door Closer Polished Chrome

Product Code: 77288
Perko Concealed Door Closer Polished Chrome
Product Code: 77288
30 and 60 minutes fire tested on latched fire doors.

Features

  • Maximum Door Weight 50.8kg

Specifications

Fixings supplied. EN 1634.
€18.95 Incl. 20% VAT
Add to Wishlist

Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 51 mm
  • Product Type : Perko Concealed Door Closer
  • Max Door Weight : 50.8 kg
  • Fixings Supplied : Fixings supplied
  • Model No : R2.CP
  • Product Width : 25.4 mm
  • Colour : Polished Chrome
  • Product Depth : 152.5 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Manufacturer's Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation


More Items to Consider

More Items to Consider

Loading... Loading...
1
Perko Concealed Door Closer Polished Chrome is rated 4.8 out of 5 by 5.
Rated 5 out of 5 by from Set's Industry Standard Perko are known in the construction industry as setting the bench mark standard in door closures. As an RIBA member we specify Perko concealed closures as standard as they are known as trustworthy.
Date published: 2016-11-19
Rated 4 out of 5 by from There's a knack to fitting The instructions are quite enough to successfully fit one of these single handedly; here's my take on it. Do not attempt to make things easier by slackening the tension. After drilling the hole in the door and marking the centre on the frame rebate the door to take the door plate. Do the same to the door frame remembering to drill a hole to take the securing pin. Turn the anchor plate through 90 degrees so you can reach the screw holes so you can secure the assembly into the door. Make sure the screws are firm. Wedge the door fully open and using a claw hammer pull the chain out as far as it will go and slip in the retainer. Now fix the anchor plate. Finally, remove the retainer. It works quite well but not quite strong enough to overcome the door latch.
Date published: 2016-10-01
Rated 5 out of 5 by from Tricky to fit, but works well The first thing you'll need to know is that you require a 25mm drill bit that is capable of drilling a hole 146mm deep. None of my spade bits were long enough, so I bought a 300mm long one, code 11138, which worked fine. The next thing to know is that the spring really is extremely powerful, which is to be expected as it needs to pull the door closed with very little leverage. That does make fitting this door closer quite difficult on your own. You have to pull to the chain out and slip a slotted piece of metal onto the chain to allow the end plate to be screwed in, but this really is a three hand job. I ended up screwing the end plate into the door, then pulling the chain out by tugging on the main body of the door closer, whilst using my other hand to fit the piece of metal over the chain. I then unscrewed the end plate from the door and proceeded as per the instructions.
Date published: 2015-02-03
Rated 5 out of 5 by from Use correct auger bit Great product, just make sure you have the correct auger bit.
Date published: 2012-05-04
Rated 5 out of 5 by from Use correct auger bit Great product, just make sure you have the correct auger bit.
Date published: 2012-05-04
  • y_2016, m_12, d_2, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_GB, sid_77288, prod, sort_[SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix-ie