Titan TCT Saw Blades 80T 250mm x 16 / 25 / 30mm Product Code: 75549

Long-life tungsten carbide-tipped circular saw blades that give performance and value. Very fine cut in plastic and non-ferrous metals. Perfectly suited to cutting parquet, laminate, epoxy, glass fibre and cement-bonded fibre boards.


  • Fine Clean Cut
  • Cutting Width (Kerf): 2.6mm
  • Tungsten Carbide Teeth
  • Rake Angle: -5°


Diameter 250mm. Number of teeth 80. Cutting bore 16 or 25 or 30mm. Fine cut and clean. For cutting aluminium / plastic.
Additional Information
Technical Specification
  • Brand : Titan
  • Product Type : Circular Saw Blade
  • Suitable Application : For Cutting Aluminium or Plastic
  • Total Product Weight : 944 kg
  • Disc Bore Size : 16/25/30 mm
  • Pack Size : 1
  • Type of Cut : Fine Clean Cut
  • Number of Teeth : 80
  • Product Diameter : 250 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Cutting Width : 2.6 mm
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

Was €34.45

Special Price €16.95

Incl. 20% VAT

Save €17.50 (50%)

Add to Wishlist

More Items to Consider

Loading... Loading...
Titan TCT Saw Blades 80T 250mm x 16 / 25 / 30mm is rated 4.3 out of 5 by 15.
Rated 5 out of 5 by from Quality saw blade I bought this blade for my aruaber mitre saw, was so pleased went back and bought a fine toothed blade of same Manley. Well pleased
Date published: 2017-08-17
Rated 5 out of 5 by from Best blade ever I have been using these blades for several years on my Radial Saw bench. The 80T blade gives a very smooth cut and is great for cutting aluminium extrusions.They have very good life and the Titan range has all the blade variables that I need. I also use them on my portable saw.
Date published: 2017-08-17
Rated 4 out of 5 by from great Blade Good clean cuts No Flexing so accurate does what its supposed to do
Date published: 2016-12-19
Rated 5 out of 5 by from Quality saw blade Fitted this new saw blade to an old table saw my Dad gave me and works a treat. Clean easy cuts to all types of wood I have put through it. Originally thought it was quite expensive but definitely worth it and am sure it will work well for a long time to come.
Date published: 2016-12-12
Rated 5 out of 5 by from 80 T Blade Bought this to cut 3mm mdf. Used with Titan table saw and cut perfectly, giving an edge as good as the manufactures finish. Also cut some 9mm melamine faced mdf and achieved a clean finish. Seems like an ideal blade for fine work.
Date published: 2016-06-16
Rated 5 out of 5 by from Sawblade Does what it says on the box good value ! Will buy again
Date published: 2016-04-25
Rated 5 out of 5 by from 80T saw blade Needed to make sure I didn't chip the edges of some high quality MDF and chip board products for a new kitchen. This blade did the job (mounted in an Erbuaer table saw
Date published: 2016-04-13
Rated 5 out of 5 by from Good clean cut Used on a McKellar MCKM23 table saw: used a rubber grommet inside the arbor washer to press the 30/16 adapter bush onto arbor face as there was enough room inside cup of the washer for it to fall into. Tested by cutting lengths of 15mm MFC with blade height set to about 25mm above table. Very smooth finish to the chipboard, clean on top face and bottom faces. Just a microscopic amount of chipping on the bottom face - smaller than 0.2mm. Also tried some 22mm oak floor boards, clean upper face and very small amount of chipping on lower - with a cross cut - so to be expected. Almost planed like face on timber with no rotational saw markings. Tested cutting 10mm HDPE sheet, clean upper face and small amount of swarf on lower face but still very good. Overall, I am very pleased with the blade and its ability to produce a good clean finish on the materials I tried, the 2 types of cutting tip on the blade edge and thickness of the blade help this. Keeping the blade as shallow as possible helps to reduce the very tiny amounts of surface chipping on lower face as will taping or using scrap piece for backing - but for 15mm MFC just a shallow blade is fine.
Date published: 2016-04-02
  • y_2017, m_10, d_21, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_GB, sid_75549, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie