Vent-Axia 450873 20W Extractor Fan Wall Fixing Kit 150mm Product Code: 33014

€27.45
Contains: fixings, grille and wall duct.

Features

  • Extraction Rate
  • Noise Level dBA at 3m
  • Wall-Mounted
  • 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Model No: 450873
  • Width: 98mm

Specifications

20W. . . Hole dia. 152mm. Spigot dia. . Width: 98mm. For use with Extractor Fan: (Code 61795). Fixings Supplied.
Additional Information
Technical Specification
  • Brand : Vent-Axia
  • Product Height : 98 mm
  • Product Type : Extractor Fan Wall Fixing Kit 150mm
  • Power Output (Watts/Kw) : 20 W
  • Fixings Supplied : Fixings Supplied
  • Model No : 450873
  • Product Width : 98 mm
  • Pack Size : 1
  • Installation Type : Wall-Mounted
  • Product Diameter : 150 mm
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Mount Type : Wall-Mounted
Product Contents
Fixings, grille and wall duct.
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€27.45 Incl. 20% VAT

Add to Wishlist

1
Vent-Axia 450873 20W Extractor Fan Wall Fixing Kit 150mm is rated 4.3 out of 5 by 4.
Rated 5 out of 5 by from Good but expensive I bought and installed two of these duct kits within an external metal clad wall. I used a 152mm hole saw but had to do a little bit of filing around the metal hole before the plastic solid duct would fit then I used a wide piece of wood and a mallet to carefully and evenly tap the duct into the hole to achieve a very tight fit and satisfactory fit. Then with the duct in place and flush with the internal wall, I marked around the duct with a pen flush with the outside wall, then pulled the duct out from the wall slightly. I carefully cut around the pen mark then gently tapped the duct back into the wall until it was flush with the external wall. The 150mm solid plastic duct and external grill are both good quality items if a little bit expensive. I would definitely use this product again and recommend it rather than the flexible ducting.
Date published: 2017-07-26
Rated 2 out of 5 by from very tight fit for 152mm hole Bought this to go with a Vent Axia 150mm kitchen fan. Cut a hole with a [brand new]152mm core bit. The sleeve was too tight a fit to get in easily. Managed it, but it was quite an effort. External grille could do with gravity flaps as the backdraft mechanism in the fan failed after only a week. Altogether not v. satisfactory...
Date published: 2017-03-02
Rated 5 out of 5 by from excellent product used instead of a cooker hood - intalled in cupboard above hob. powerful and above all very quiet when compared with conventional hoods. with a 6inch outlet you need plenty of room unless you decide to reduce down to 4inch
Date published: 2012-11-29
Rated 5 out of 5 by from excellent product used instead of a cooker hood - intalled in cupboard above hob. powerful and above all very quiet when compared with conventional hoods. with a 6inch outlet you need plenty of room unless you decide to reduce down to 4inch
Date published: 2012-11-29
  • y_2017, m_8, d_18, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_33014, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie