Dakota LED Brick Light Stainless Steel 2.7W Product Code: 81265

Metal and plastic construction.


  • IP65
  • Fixed
  • Max. Wattage: 2.7W
  • Stainless Steel
  • Model No: 81265
  • 1 Year Guarantee
  • Anti-Rust Coating
  • Maintenance-Free LED Included


240V. W x D x H: 198 x 62 x 72mm. Integrated LED. Cable Not Supplied. Fixings Supplied. Transformer Included. 2 x conduit entry points. Poole Lighting.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 72 mm
  • Product Type : LED Brick Light
  • Power Output (Watts/Kw) : 2.7 W
  • IP Rating : IP65
  • Model Name : Dakota
  • Finish : Stainless Steel
  • Fixings Supplied : Fixings Supplied
  • Total Product Weight : 0.36 kg
  • Construction Material (Lighting) : Stainless Steel
  • Model No : 81265
  • Lamp Type : LED
  • Product Width : 198 mm
  • Parent Colour : Silver
  • Dimmable : Non-Dimmable
  • Colour : Stainless Steel
  • Product Depth : 62 mm
  • Pack Size : 1
  • Max. Wattage : 2.7 W
  • Lm : 195 lm
  • Power Voltage Supply : 240 V
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Adjustable : Fixed
Product Contents
1 x light fitting and fixings.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€45.45 Incl. 20% VAT

Add to Wishlist

Included in this price is a contribution to recycling costs of €0.05 (€0.04 ex VAT).

More Items to Consider

Loading... Loading...
Dakota LED Brick Light Stainless Steel 2.7W is rated 3.0 out of 5 by 25.
Rated 2 out of 5 by from Impossibly fiddly things These light are not great at all. Very fiddly fittings with screws and bolts galore just to get the things apart to see how best to fit them. By a long way not the best I've installed and I won't spec them again. Pitifully dim too. So if you use them every metre or so then they might perform OK - but that's a lot of lights on even a modest drive/path.
Date published: 2017-07-03
Rated 1 out of 5 by from Poor design Very difficult and time consuming to fit. Does not fit any standard back box You have to remove TWELVE fiddly screws before you can attach L+N, then refit them. Never again!
Date published: 2017-07-02
Rated 1 out of 5 by from Not brick size! Bought a pair of these to replace an existing pair of brick lights that had corroded. However these are quite a bit smaller than a brick and would need a large surround of mortar to fill in around them. Just got another set that are the brick size & shroud that covers the outer edge fine. Check the dimensions!
Date published: 2017-05-06
Rated 1 out of 5 by from Something must have changed It looked promising from the review, but something must have changed as I've never fitted such a fiddly & poorly manufactured light fitting. First of all the light casing is quite flimsy and no proper fixing holes. Secondly the cable terminations are very poor for access & it means dismantling the entire fitting to access them. Thirdly after messing around for 45minutes there was a dry solder on the LED board . I WILL BE TAKING BACK FOR A FULL REFUND =(
Date published: 2016-12-29
Rated 4 out of 5 by from LED Brick light Replacing some older lights with these LED ones and the only issue I had was that these lights are designed for very light cable, not even lighting ring really. If it's too heavy they are a nightmare to fit. I used some flex and had to tape in to seal and the end product is great, bright and good direction with a modern look. Recommended but note the comment about the cable.
Date published: 2016-04-05
Rated 2 out of 5 by from Ok but fragile hard to fit Just fitted four of these around a pool. The light output is pretty good. Could do with louvres or more opaque lens as others have said but not too big a deal. Very difficult to fit however and very fidly. Two machine screws, six machine screws and nuts and four self tappers required to be removed to fit these lights. There are a lot of through mount legs coming through the board right next to were the cables come in. The LED board is very flexible and the solder connections are very delicate.
Date published: 2015-12-08
Rated 1 out of 5 by from worst purchase ever we purchased 6 of these approx 18 months to 2 years ago, they have had limited use given that they are led and are supposed to have a long life! Out of the 6 only 1 is fully lit, all the others have LEDs gone and one is almost out altogether. Very disappointed with the product and the problems of trying to replace. Not cheap would have expected better quality for the price.
Date published: 2015-10-07
Rated 5 out of 5 by from Good Brick Light Fitted six of these in a retaining wall, really nice finish, provides a good light and they are well made. Little on the expensive side though, for that kind of price would have really liked captive nuts for fitting the lens on.
Date published: 2015-06-18
  • y_2019, m_5, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_GB, sid_81265, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie