Flooring Clamp Product Code: 19107

€10.45
For secure laying of laminate and parquet flooring.

Features

  • Metal Plate Holds Securely Across First Plank
Additional Information
Technical Specification
  • Brand : Unbranded
  • Total Product Weight : 0.839 kg
  • Colour : Blue
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€10.45 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Flooring Clamp is rated 3.8 out of 5 by 39.
Rated 3 out of 5 by from Flooring Clamp Great if you are using tongue and groove type flooring but not so good for the click lock type.
Date published: 2018-10-07
Rated 1 out of 5 by from Cheap and nasty Clamps. Don't bother with these. I bought a pair, the one that worked struggled to pull the laminate together and felt cheap. The one that didn't work slipped off like the other reviewer stated, as the lip that sits on the laminate was over 90 degs.
Date published: 2018-03-29
Rated 1 out of 5 by from Rubblsh Would not hold on to the panel, flew off and damaged edge that I can not replace without ripping floor up.
Date published: 2018-03-08
Rated 3 out of 5 by from Not brilliant This clamp has a webbing strap around 3.5 metres long but it isn't possible to wind the complete length onto the tool , so it's not much use unless you cut the strap or start clamping your floor after several rows of planks. Releasing the clamp was easiest using a screwdriver rather than bare hands. the instructions need a magnifying glass. I expect the Bessey clamp is a better bet but it should be at more than 3 times the price.
Date published: 2018-02-16
Rated 5 out of 5 by from Flooring clamp Could not have layed the floor without them, great bit of kit at a very good price.
Date published: 2017-01-24
Rated 4 out of 5 by from Very useful floor clamps Works extremely well. For the price, a great piece of equipment. The floor wold not have looked as good without these 2 clamps.
Date published: 2016-10-18
Rated 4 out of 5 by from Good product Used for laying a large engineered wood floor. This tool performs very well but does require a couple of tweaks before use. These adjustments take a couple of minutes and are well worth doing. The tool itself is essential when laying any click together or tongue and groove floor and does its job extremely well. Don't be coerced into buying the more expensive versions, they don't do the job any better. Tips: 1. Rub down the surface of the underside with a light sand paper, the paint finish is a little rough and this will prevent any scratches 2. remove the screw holding the ratchet to the plate and scrape out the paint underneath it then refit and tighten. This prevents the screw head damaging the floor surface. 3. Don't strike the ratchet plate with a hammer as it will mark the floor or damage the ratchet 4. Don't over tighten as the ratchet can buckle under excessive load. 5. Hold down the plate end with a tool box / large paint can / Wife or similar as it can lift the boards when tightening.
Date published: 2016-06-21
Rated 5 out of 5 by from Make floating wood floors easy bought these to help my son lay a floating solid wood tongue and groove floor. Don't know how we would have done the job (well) without them. These work really well and are a bargain at the price.
Date published: 2016-06-13
  • y_2018, m_11, d_4, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_39
  • loc_en_GB, sid_19107, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie