FloFit Flo-Fit FB15 Single Push-Fit Elbow White 15mm Product Code: 38081

Flexible and fully demountable push-fit plumbing system ranging from 10-22mm. Suitable for all domestic/commercial hot and cold water installations. Enables the installer to undertake a faster, easier and more cost effective installation. Maintenance-free white finish. Good thermal resistance to freezing conditions.


  • Construction
  • Demountable & Reusable
  • Domestic Hot & Cold Water Systems
  • For PE-X, Polybutylene & Copper Pipe
  • Manufactured under ISO 9000 Systems
  • Observe Insertion Depths
  • For Use with FloPlast Pipe Inserts


BS 7291.
Additional Information
Technical Specification
  • Brand : FloFit
  • Product Height : 53.68 mm
  • Product Length : 53.68 mm
  • Product Type : Elbow
  • Model Name : Flo-Fit
  • Total Product Weight : 0.03 kg
  • Model No : FB15 Single
  • Connection Type : Push-Fit
  • Colour : White
  • Pack Size : 1
  • Suitable System : Domestic Hot & Cold Water Systems
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Mount Type : Demountable & Reusable
  • CE Standard (Tested to EN...) : BS 7291.
Product Contents
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€1.35 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloFit Flo-Fit FB15 Single Push-Fit Elbow White 15mm is rated 4.0 out of 5 by 8.
Rated 1 out of 5 by from Disappointment I used them on simple straight line to a radiator, leaking . Never more, badly, cheap made.
Date published: 2019-08-30
Rated 5 out of 5 by from Push fit marvels Just push it right on the copper pipe and jobs done. Makes connecting pipes together so easy. In the very near future, these will make soldered and compression fittings a thing of the past.
Date published: 2014-09-08
Rated 5 out of 5 by from So easy!! Cut pipe, push together. No leaks. What more is there to say?
Date published: 2014-05-19
Rated 5 out of 5 by from Good quality. Nice strong unit, good fittings that can be taken on and off without breaking or leaks appearing.
Date published: 2013-12-20
Rated 5 out of 5 by from replacements work fine Used loads of these and had a couple fail. Just very slight weeps which over time dribbled down the plaster and caused me a bit of a headache. The replacements work fine though so must have been something wrong with the internal O-ring. The simplicity of use do make these so easy to change though.
Date published: 2013-08-21
Rated 4 out of 5 by from More compact than Speefit The principal reason for buying the FloPlast Flo-Fit fittings was to save space in a tight area. Up to now I've used the JG Speefit fittings with great success (earliest use about 2 years ago and no problems to date), but they are relatively bulky. This is not usually a problem, but they are awkward in a tight space, particularly if you need to get your hand in to do/undo the threaded locking collar. The Flo-Fit fittings are significantly slimmer and shorter, and do not require a threaded locking collar to be screwed/unscrewed. Instead they use a self-contained clip. One disadvantage of Flo-Fit is that they require a significantly longer section of pipe to be inserted (33mm in total), so can be a bit more awkward to take apart for any future change or system maintenance. I cannot comment on reliability as I've only just fitted one.
Date published: 2012-11-06
Rated 2 out of 5 by from leaks leaks leaks Save yourself some money and buy the more expensive speedfit fittings. I've bought these as singles and as a pack from screwfix, not screwfix's fault but i have had at least two faulty elbows that have later caused damage to customers property because of a faulty plastic casting on the main elbow body. Replaced both faulty items with speedfit fittings and they worked straight away. Proceed with extreme caution if you plan on putting these under a floor - ie don't do it - use Speedfit or Hep 2o instead. The coloured ring collets are a good idea though.
Date published: 2012-09-10
Rated 5 out of 5 by from does what it says on the tin very cheap and does the job. no mess no hassle no soldering.
Date published: 2012-06-25
  • y_2019, m_11, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_GB, sid_38081, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie