FloFit Flo-Fit FB22 Push-Fit Elbow White 22mm 5 Pack Product Code: 89840

Flexible and fully demountable push-fit plumbing system ranging from 10-22mm. Suitable for all domestic/commercial hot and cold water installations. Enables the installer to undertake a faster, easier and more cost effective installation. Maintenance-free white finish. Good thermal resistance to freezing conditions.


  • Construction
  • Demountable


BS 7291.
Additional Information
Technical Specification
  • Brand : FloFit
  • Product Height : 65.88 mm
  • Product Length : 65.88 mm
  • Product Type : Elbow
  • Model Name : Flo-Fit
  • Total Product Weight : 0.05 kg
  • Model No : FB22
  • Connection Type : Push-Fit
  • Colour : White
  • Pack Size : 5
  • Product Diameter : 22 mm
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 5
  • Mount Type : Demountable
  • CE Standard (Tested to EN...) : BS 7291.
Product Contents
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€8.35 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloFit Flo-Fit FB22 Push-Fit Elbow White 22mm 5 Pack is rated 2.9 out of 5 by 27.
Rated 1 out of 5 by from Don't buy these 1/2 of them won't demount at all, had a few with bad o rings. When you add up the bad ones may as well pay more and get a more reliable brand. When they're not faulty they do work easily but it's not worth the faff when one doesn't.
Date published: 2019-04-23
Rated 4 out of 5 by from They work. I’ve used these a few times now, they work well as long as you make sure that the pipe is fully pushed in, they can sometimes feel seated until you give a good hard push (I mark the joint depth on the pipe, it’s roughly the depth of the pipe insert) Doesn’t feel as nice as JG but when you use a lot of them the price could sway you
Date published: 2019-03-18
Rated 5 out of 5 by from OK These work ok, they don't go together has well as other brands out there, but they are cheap.
Date published: 2019-01-13
Rated 1 out of 5 by from Shockingly bad These are the worst pushfit fittings I've ever used. Speedfit and Hep20 don't leak, these do. They feel cheap plastic, look cheap plastic, and leak. Screwfix please listen to your long term customers and get rid of these.
Date published: 2018-02-03
Rated 1 out of 5 by from cheap, but leaking Bought them to use with central heating pipes and half of them were leaking. Lots of hassle, never again.
Date published: 2017-04-30
Rated 5 out of 5 by from Flofit ok I always use copper and soldered joints but these preferable for boat fitting out due to very long runs and risk of freezing. Wary given some of the reviews but did the whole central heating system and hot and cold water system with no leaks. Difficult to know sometimes whether pipe fully home in joint so marked each pipe 40mm or so from its end as reference point to be sure. Pipes sag between clips when hot but I guess all makes would. Still prefer copper, a good pipe bender and solder for domestic.
Date published: 2017-02-26
Rated 1 out of 5 by from Half of them leak I purchased 10 of these for my own heating system & fitted only to find 4 out of the 10 leaked. I first thought I hadn't pushed them home fully but on inspection it was down to the poor design. I took them all out including the ones that didn't leak and fitted JG as I lost confidence in them. Surprise surprise no leaks with JG. It's worth paying a bit more for a quality product rather than trying to save with the cheaper option as I ended up buying both.
Date published: 2017-01-29
Rated 5 out of 5 by from So simple Lube the pipe. Press home. Job done! If you need to adjust, spring off the locking clip, press in the lock collar and slide off. So simple.
Date published: 2017-01-17
  • y_2019, m_5, d_21, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_GB, sid_89840, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie