Makita HP1631K/2 710W Percussion Drill 240V Product Code: 46545

The Makita HP1631K/2 percussion drill is suitable for a full range of applications. With 240V and a no load speed of up to 3200rpm, this Makita tool is powerful enough to drill through wood, steel, masonry, brick and block. It also weighs just 1.9kg and features a plush soft-grip handle, making it easy and comfortable to use. A carry case means that the tool is also easy to transport and there is also a side handle which allows for extra stability during use.


  • 710W
  • Variable Speed
  • 13mm Keyless Chuck
  • Lock-On Switch
  • Soft-Grip Handle


Max. drilling capacity in masonry 16mm, wood 30mm, steel 13mm. No. load speed: 0-3200rpm. Overall length: 239mm. Weight: 1.9kg. Includes Plug.
Additional Information
Technical Specification
  • Brand : Makita
  • Product Length : 239 mm
  • Product Type : Percussion Drill
  • Power Output (Watts/Kw) : 710 W
  • Brushless : Brushed
  • Chuck Type : Keyless Chuck
  • Corded or Cordless : Corded
  • Total Product Weight : 1.9 kg
  • Model No : HP1631K/2
  • Pack Size : 1
  • Capacity Wood : 30 mm
  • Switch Type : Lock-On Switch
  • Chuck Capacity : 13mm
  • Capacity Steel : 13 mm
  • No Load Speed : 0-3200 rpm
  • Power Voltage Supply : 240 V
  • Carry Case/Bag Included : Yes
  • Manufacturer Guarantee : 3 Year Manufacturer’s Guarantee (Registration Required, T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Capacity Masonry : 16 mm
Product Contents
HP1631K/2, carry case, side handle.
Delivery & Returns


Standard delivery: €15

Free delivery on all orders over €70.00

Click here to see information on our delivery charges and times



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€104.95 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Makita HP1631K/2 710W Percussion Drill 240V is rated 3.2 out of 5 by 24.
Rated 1 out of 5 by from very poor just over a year old and the chuck has seized, it has always slipped when under pressure, and been difficult to open, also the motor has always arked badly, i suspect a poor motor
Date published: 2019-03-27
Rated 4 out of 5 by from Good so far I bought this to replace a workhorse Bosch drill that I had had for 20 years. So far looks hopeful that it will be a good relplacement It seems quiet and the chuck is smooth to adjust The switch to engage the hammer action stuck halfway for a bit but then seemed to free itself, hope that its not a warning of trouble ahead but working fine at present
Date published: 2019-03-03
Rated 2 out of 5 by from does not cope with slow speeds using a 25mm auger bit at the required slow speed the drill overheated and emitted smoke. Like all drill manufacturers the gearing provides an unwanted high speed and no where near good enough for low speeds. I will revert to a make that provides a speed dial on the top which gave far better low speed control.
Date published: 2018-09-17
Rated 5 out of 5 by from FIRST CLASS corded drill Used plenty of battery drills before, but this is the best corded drill have had for a long time. After registration confirmed 3 year warranty. Proves you get what you pay for.
Date published: 2018-05-01
Rated 2 out of 5 by from Not the usual Makita quality Within weeks of ownership the chuck would jam and not release, but when using percussion setting it would undo and no matter how tight it was done up it would release. Additionally, it overheated in percussion mode flinging the melted grease from the nose bearing. I've had Makita in the past (still have), but this must be the black sheep of the family.
Date published: 2017-02-22
Rated 2 out of 5 by from OK, but basic OK drill - doesn't centre well. Chuck is cheap and not durable. Cable length is terrible - you'll need an extension lead for any job - other than drilling a hole next to a socket!
Date published: 2016-12-04
Rated 5 out of 5 by from Excellent Purchase Purchased recently. But outstanding performance in difficult situations. Comfortable to use. Sensible weight and balance. Easy to use lockable chuck. Pleasure to use
Date published: 2016-12-03
Rated 1 out of 5 by from Fatally flawed chuck The Makita brand and the, featured, more positive reviews persuaded me to 'buy blind'. Looking back, I noticed, too late, that others had also spotted the poor chuck arrangement. Sadly, the chuck design is fatally flawed, in that whatever depth you might want to drill into, the chuck only grips with the drill pushed right into the chuck. If that only leaves, say, 30mm protruding, that's all you can ever go with that bit. Fantastic on paper, useless in reality, what a pity.
Date published: 2016-10-05
  • y_2019, m_7, d_11, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_GB, sid_46545, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie