Manrose LP100ST 20W Ceiling / Wall Mounted Extractor Fan + Timer Product Code: 12473

€24.95
ABS thermoplastic. Chrome square grille. Compliant with Part F of the Building Regulations. BEAB approved.

Features

  • Extraction Rate 85m³/hr
  • Noise Level 41dBA at 3m
  • Ceiling or Wall-Mounted
  • 1 Year Guarantee
  • Timer
  • Profile Depth: 110mm

Specifications

20W. 240V. Flush Fit. IP24. Width: 140mm. Profile depth: 110mm. Fixings Supplied. Hole dia: 112mm. Spigot dia: 100mm. Rear spigot exit. Ducting Not Included. Covered Fixings. Noise level at 3m: 41dBA.
Additional Information
Technical Specification
  • Brand : Manrose
  • Product Height : 140 mm
  • Product Type : Ceiling / Wall Mounted Extractor Fan + Timer
  • Power Output (Watts/Kw) : 20 W
  • IP Rating : IP24
  • Finish : Chrome
  • Fixings Supplied : Fixings Supplied
  • Model No : LP100ST
  • Extraction Rate : 85 m³/hr
  • Product Width : 140 mm
  • Pack Size : 1
  • Switch Type : Timer
  • Power Voltage Supply : 240 V
  • Product Diameter : 100 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Ceiling or Wall-Mounted
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€24.95 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Manrose LP100ST 20W Ceiling / Wall Mounted Extractor Fan + Timer is rated 3.9 out of 5 by 122.
Rated 5 out of 5 by from Great product. Great value extractor fan.. quiet when running and with an adjustable timer. Very easy to fit and standard size so easy to replace an old fan with. Chrome finish is a little plasticky but for the price you can't complain.
Date published: 2019-03-03
Rated 4 out of 5 by from Good looking fan This fan looks good. Very slim and not intrusive. Does everything that a fan should do.
Date published: 2019-02-18
Rated 5 out of 5 by from Extractor Fan I brought this fan as a direct replacement and it fitted perfectly and came with the clips and fixings so could be clipped in through plasterboard or screwed directly to a solid wall.
Date published: 2019-02-17
Rated 5 out of 5 by from Replacement fan Bought this to replace an existing extractor fan. Easy to fit. No screws required to fit to wall as it is push fit into the hole in the wall.
Date published: 2019-02-10
Rated 5 out of 5 by from Nice little fan Excellent fan looks good very good price especially with timer will buy more
Date published: 2019-02-01
Rated 4 out of 5 by from Easy to Fit This replaced a Manrose fan of similar fixing hole dimensions. To those who downrated it because they struggled with the internal wiring I would suggest that after making the three internal connections, they push the wires into the channel provided and secure them (plus the two wires going to the motor) with a strip of insulation tape or similar wrapped around the moulding near to the wire entry end. Then replace the moulding cover and, using a finger to ensure all the wires remain where you want them to be, insert and tighten the two retaining screws. Worked first time with no nipping of wires!
Date published: 2019-01-29
Rated 5 out of 5 by from Extractor fan Excellent product Instructions are not very clear but if you have a little bit of knowledge about diy you can figure it out
Date published: 2019-01-25
Rated 5 out of 5 by from Tidy Good item pleased with it simple to fit timer simple to adjust
Date published: 2018-12-21
  • y_2019, m_3, d_21, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_120
  • loc_en_GB, sid_12473, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie