Upcoming UK Bank Holiday   |   Temporary delivery disruption in Dordogne region of France

Vent-Axia 100H 6W LoCarbon Silhouette Axial Bath Extractor Fan w/Humidistat Product Code: 41748

€127.95
Plastic. White square grille. Long life DC motor lasts 50,000 hours longer than the AC equivalent. Compliant with Part F of the Building Regulations. BEAB approved.

Features

  • Extraction Rate 108m³/hr
  • Noise Level 32dBA at 3m
  • Ceiling or Wall-Mounted
  • Backdraft Shutter
  • 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • Humidistat
  • Profile Depth: 17mm
  • Power Indicator
  • Discreet Slim Profile Design
  • 6W Power Consumption

Specifications

6W. 230V. Surface-Mounted. IPX4. Width: 160mm. Profile depth: 17mm. Fixings Supplied. Hole dia: 105mm. Spigot dia: 99mm. Rear spigot exit. Ducting Not Included. Covered Fixings. Noise level at 3m: 32dBA. Thermal overload protection. Double insulation.
Additional Information
Technical Specification
  • Brand : Vent-Axia
  • Product Height : 160 mm
  • Product Type : LoCarbon Silhouette Axial Bath Extractor Fan w/Humidistat
  • Power Output (Watts/Kw) : 6 W
  • IP Rating : IPX4
  • Fixings Supplied : Fixings Supplied
  • Model No : 100H
  • Extraction Rate : 108 m³/hr
  • Product Width : 160 mm
  • Pack Size : 1
  • Construction Material (Heating) : ABS Plastic
  • Switch Type : Humidistat
  • Power Voltage Supply : 230 V
  • Product Diameter : 100 mm
  • Manufacturer Guarantee : 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Mount Type : Ceiling or Wall-Mounted
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery: €15

Free delivery on all orders over €70.00



Click here to see information on our delivery charges and times

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€127.95 Incl. 20% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Vent-Axia 100H 6W LoCarbon Silhouette Axial Bath Extractor Fan w/Humidistat is rated 3.7 out of 5 by 10.
Rated 1 out of 5 by from Please read before purchasing The chances are you are considering this fan due to the high extract rate for a 100mm fan, the fact it can be controlled by a humidistat and it is made by a well known brand, the reason I say that is because these are the extract reasons I purchased it. As all the other reviews seem to only discuss what model it actually is I thought I would just start by confirming it is the 100HT LO CARBON model, this means yes it has the higher extract rate and can be controlled by solely humidistat, manual switch / lighting circuit (or both) and yes you guessed it the ‘T’ means it does have an overrun timer. Right now to the bad bits which I wish I knew about before I purchased it.... 1: The anti backdraft flaps on the back have two very week plastic locating pins / hinge which easily snap. Also the spring that keeps these flaps closed easily moves out of location and the flaps then stay open. (TBH this didn’t bother men that much as I was fitting a exterior flap vent) 2: Now for the important problem, the humidistat does not work correctly with the cover on (tried boiling a kettle below the extractor and had the setting on min humidity). This is because the cover has a little opening on it right below the led for the humidistat to measure the humidity. The only problem with this is that the humidistat is not actually located near the led, it is actually located on the opposite side. Hope this helps saves someone some time and unnecessary work. I have now returned this and fitted the VENT-AXIA SVARA 409802 4W LO-CARBON APP CONTROLLED EXTRACTION FAN (8827P) which is all smartphone controlled and has all the same features and more plus the same max extraction rate of 108 m3/ph
Date published: 2017-12-08
Rated 4 out of 5 by from Quite expensive for what it is Fan has got multiple features like time delay, humidity sensitivity and fan speed (low or high). On high speed it is really extracting very well, however it is rather noisy. I probably disconnect light switch wire and leave to extract only when humidity is high. There is no seal around electronic components and front cover so I was quite surprised, especially that is highly rater for water egress (IP rating). Front is note ideally square and front cover is very flexible giving feeling this being cheap product. No duct kit in the set. Overall - good product, good performance but nosier than expected and too expensive for what it is. I'm just hoping it will be reliable.
Date published: 2017-10-17
Rated 4 out of 5 by from It is the Lo-Carbon 100HT! Phatado's review of this product is wrong, and the mistake is Vent-Axia's not Screwfix's as the Box label says 100H. The model number is correct for the Lo-Carbon HT (441626A) and the item itself and all the documentation in the box fit with being the Lo-Carbon 100HT. One note of caution though - I was replacing a previous Silhouette 100T with this fan and the Lo-Carbon model has a substantially (~75mm) longer "barrel", so if you're fitting into existing ducting, make sure you have sufficient clearance behind the wall or be prepared to make spacers from plywood or something to mount on so the front of the fan can sit proud of the wall. Otherwise it' substantially quieter than the previous Silhouettes and seems to draw OK. Can't rate reliability yet - previous Silhouettes have lasted about 7 years each in a heavily used family bathroom.
Date published: 2017-01-29
Rated 4 out of 5 by from Vent-Axia Fan Had to replace it as it was faulty and emitted a high pitched squeal when connected to L-N.
Date published: 2016-11-30
Rated 3 out of 5 by from NOT the LoCarbon Model... I have been onto Vent-Axia asking about this. Reson being that having bought the 100H I looked on the Vent-Axia website where it says the Lo-Carbon models are 100B, 100T and 100HT. I wrote to them asking about the 100H - this is their reply to the 100H: "In the Lo Carbon Range we sell the Silhouette 100 HT and in the non Lo Carbon Range Silhouette 100H " I have not actually installed it hence the mediocre review - this is to highlight that it's not what is actually being advertised. A quick look for the 100H on the Vent-Axia website comes back that it's not a lo-carbon one - indeed they don't seem to be selling it, which they do their other ones. Also all the Stats on the Screwfix page are INCORRECT. They should be: xtraction Rate 75m³/hr NOT 95m³/hr Noise Level 38dBA at 3m NOT 32dBA at 3m 14W Not 6W Power Consumption
Date published: 2014-01-21
Rated 3 out of 5 by from NOT the LoCarbon Model... I have been onto Vent-Axia asking about this. Reson being that having bought the 100H I looked on the Vent-Axia website where it says the Lo-Carbon models are 100B, 100T and 100HT. I wrote to them asking about the 100H - this is their reply to the 100H: "In the Lo Carbon Range we sell the Silhouette 100 HT and in the non Lo Carbon Range Silhouette 100H " I have not actually installed it hence the mediocre review - this is to highlight that it's not what is actually being advertised. A quick look for the 100H on the Vent-Axia website comes back that it's not a lo-carbon one - indeed they don't seem to be selling it, which they do their other ones. Also all the Stats on the Screwfix page are INCORRECT. They should be: xtraction Rate 75m³/hr NOT 95m³/hr Noise Level 38dBA at 3m NOT 32dBA at 3m 14W Not 6W Power Consumption
Date published: 2014-01-21
Rated 5 out of 5 by from Vent Axia Fan 441626 This is an excellent fan which works as claimed,I thoroughly reccomend it.
Date published: 2013-09-19
Rated 5 out of 5 by from Vent Axia Fan 441626 This is an excellent fan which works as claimed,I thoroughly reccomend it.
Date published: 2013-09-19
  • y_2018, m_8, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_41748, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie